Dodge 2015 Dart Скачать руководство пользователя страница 74

Страница: 74 / 664

The OCS will detect the front passenger’s decreased or

increased seated weight, which may result in an adjusted

inflation rate of the Passenger Advanced Front Air Bag in

a collision. This does not mean that the OCS is working

improperly.
Decreasing the front passenger’s seated weight on the

front passenger seat may result in a reduced-power

deployment of the Passenger Advanced Front Air Bag.

Increasing the front passenger’s seated weight on the

front passenger seat may result in a full-power deploy-

ment of the Passenger Advanced Front Air Bag.
Examples of improper front passenger seating include:

•

The front passenger’s weight is transferred to another

part of the vehicle (like the door, arm rest or instru-

ment panel).

•

The front passenger leans forward, sideways, or turns

to face the rear of the vehicle.

•

The front passenger’s seatback is not in the full upright

position.

•

The front passenger carries or holds an object while

seated (e.g., backpack, box, etc.)

•

Objects are lodged under the front passenger seat.

•

Objects are lodged between the front passenger seat

and center console.

•

Accessories that may change the seated weight on the

front passenger seat are attached to the front passenger

seat.

•

Anything that may decrease or increase the front

passenger’s seated weight.

72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Содержание 2015 Dart

























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2015 Dart

Отзывы:

Похожие инструкции для 2015 Dart

Бренды по названию

Популярные бренды

Dodge 2015 Dart, Руководство пользователя

Результаты поиска

Содержание 2015 Dart

Отзывы:

Похожие инструкции для 2015 Dart

Бренды по названию

Популярные бренды