Dodge 2015 Dart Скачать руководство пользователя страница 288

Страница: 288 / 664

Pinch Protect Feature

This feature will detect an obstruction in the opening of

the sunroof during Express Close operation. If an ob-

struction in the path of the sunroof is detected, the

sunroof will automatically retract. Remove the obstruc-

tion if this occurs. Next, press the switch forward and

release to Express Close.

NOTE:

If three consecutive sunroof close attempts result

in Pinch Protect reversals, the fourth close attempt will be

a Manual Close movement with Pinch Protect disabled.

Pinch Protect Override

If a known obstruction (ice, debris, etc.) prevents closing

the sunroof, attempt to remove the obstruction and then

press and hold the switch forward until the sunroof fully

closes.

NOTE:

Pinch protection is disabled while the switch is

pressed.

Venting Sunroof — Express

Press and release the Vent button within one half second

and the sunroof will open to the vent position. This is

called “Express Vent” and it will occur regardless of

sunroof position. During Express Vent operation, any

movement of the switch will stop the sunroof.

Sunshade Operation

The sunshade can be opened manually. However, the

sunshade will open automatically as the sunroof opens.

NOTE:

The sunshade cannot be closed if the sunroof is

open.

Wind Buffeting

Wind buffeting can be described as the perception of

pressure on the ears or a helicopter-type sound in the

ears. Your vehicle may exhibit wind buffeting with the

windows down, or the sunroof (if equipped) in certain

286 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Содержание 2015 Dart

























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2015 Dart

Отзывы:

Похожие инструкции для 2015 Dart

Бренды по названию

Популярные бренды

Dodge 2015 Dart, Руководство пользователя

Результаты поиска

Содержание 2015 Dart

Отзывы:

Похожие инструкции для 2015 Dart

Бренды по названию

Популярные бренды