Dodge 2015 Dart Скачать руководство пользователя страница 38

Страница: 38 / 664

The doors can also be locked and unlocked with the

Keyless Enter-N-Go™ (Passive Entry) system. For further

information, refer to “Keyless Enter-N-Go™” in “Things

To Know Before Starting Your Vehicle”.
If you push the power door lock switch while the key is

in the ignition, and any front door is open, the power

locks will not operate. This prevents you from acciden-

tally locking the Key Fob in the vehicle. Removing the

key from the ignition or closing the door will allow the

locks to operate. If a door is open, and the ignition is in

the OFF or ACC position, a chime will sound as a

reminder to remove the Key Fob.

Automatic Door Locks — If Equipped

The auto door lock feature default condition is enabled.

When enabled, the door locks will lock automatically

when the vehicle’s speed exceeds 15 mph (24 km/h). The

auto door lock feature can be enabled or disabled by your

authorized dealer per written request of the customer.

Please see your authorized dealer for service.

Automatic Unlock Doors On Exit

The doors will unlock automatically on vehicles with

power door locks if:
1. The Automatic Unlock Doors On Exit feature is en-

abled.

2. The transmission was in gear and the vehicle speed

returned to 0 mph (0 km/h).

3. The transmission is in PARK when the door is opened

(automatic transmission vehicles).

4. The clutch pedal is not pushed when the door is

opened (manual transmission vehicles).

5. Any door is opened.
6. The doors were not previously unlocked.

36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Содержание 2015 Dart

























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2015 Dart

Отзывы:

Похожие инструкции для 2015 Dart

Бренды по названию

Популярные бренды

Dodge 2015 Dart, Руководство пользователя

Результаты поиска

Содержание 2015 Dart

Отзывы:

Похожие инструкции для 2015 Dart

Бренды по названию

Популярные бренды