Dodge 2015 Dart Скачать руководство пользователя страница 79

Страница: 79 / 664

Knee Impact Bolsters

The Knee Impact Bolsters help protect the knees of the

driver and front passenger, and position the front occu-

pants for improved interaction with the Advanced Front

Air Bags.

WARNING!

•

Do not drill, cut, or tamper with the knee impact
bolsters in any way.

•

Do not mount any accessories to the knee impact
bolsters such as alarm lights, stereos, citizen band
radios, etc.

Supplemental Driver And Front Passenger Knee
Air Bags

This vehicle is equipped with a Supplemental Driver

Knee Air Bag mounted in the instrument panel below the

steering column and a Supplemental Passenger Knee Air

Bag mounted in the instrument panel below the glove

compartment. The Supplemental Knee Air Bags provide

enhanced protection during a frontal impact by working

together with the seat belts, pretensioners, and Advanced

Front Air Bags.

Supplemental Side Air Bags

Your vehicle is equipped with two types of supplemental

Side Air Bags:
1. Supplemental Seat-Mounted Side Air Bags (SABs):

Located in the outboard side of the front and rear (in

vehicles equipped with outboard rear seat SABs) seats.

The SABs are marked with a “SRS AIRBAG” or

“AIRBAG ” label sewn into the outboard side of the

seats.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77

Содержание 2015 Dart

























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2015 Dart

Отзывы:

Похожие инструкции для 2015 Dart

Бренды по названию

Популярные бренды

Dodge 2015 Dart, Руководство пользователя

Результаты поиска

Содержание 2015 Dart

Отзывы:

Похожие инструкции для 2015 Dart

Бренды по названию

Популярные бренды