Dodge 2015 Dart Скачать руководство пользователя страница 374

Страница: 374 / 664

To Set The Pushbutton Memory

When you are receiving a station that you wish to

commit to pushbutton memory, press and hold the

button (1–5) you wish to lock onto this station for three

seconds.
You may add a second or third station to each pushbut-

ton by repeating the above procedure with this exception:

Press the A–B–C button to select the A, B or C mode. Each

button can be set for up to 3 stations in AM, FM and Sat.

This allows a total of 15 AM, 15 FM and 15 SAT stations

to be stored into pushbutton memory.

Player Button

Pressing the Player button will allow you to switch from

AM/FM modes to Player mode (CD, USB/iPOD®, AUX,

Bluetooth®).

Operation Instructions — CD MODE For CD And
MP3 Audio Play

NOTE:

•

The ignition switch must be in the ON/RUN or ACC

position to operate the radio.

•

This radio is capable of playing compact discs (CD),

recordable compact discs (CD-R), rewritable compact

discs (CD-RW), compact discs with MP3 tracks and

multisession compact discs with CD and MP3 tracks.

Inserting Compact Disc(s)

Gently insert one CD into the CD player with the CD

label facing up. The CD will automatically be pulled into

the CD player and the CD icon will illuminate on the

radio display. If a CD does not go into the slot more than

1.0 in (2.5 cm), a disc may already be loaded and must be

ejected before a new disc can be loaded.

372 UNDERSTANDING YOUR INSTRUMENT PANEL

Содержание 2015 Dart

























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2015 Dart

Отзывы:

Похожие инструкции для 2015 Dart

Бренды по названию

Популярные бренды

Dodge 2015 Dart, Руководство пользователя

Результаты поиска

Содержание 2015 Dart

Отзывы:

Похожие инструкции для 2015 Dart

Бренды по названию

Популярные бренды