Dodge 2015 Dart Скачать руководство пользователя страница 500

Страница: 500 / 664

graphic display to the vehicle’s recommended cold plac-

ard pressure value. The system will automatically up-

date, the “Inflate Tire to XX” message will no longer be

displayed, the graphic display of the pressure value(s)

will return to their normal color, and the Tire Pressure

Monitoring Light will extinguish once the updated tire

pressure(s) have been received. The vehicle may need to

be driven for up to 20 minutes above 15 mph (24 km/h)

to receive this information.

Service TPMS Message

The Tire Pressure Monitoring Telltale Light will flash on

and off for 75 seconds, and then remain on solid when a

system fault is detected. The system fault will also sound

a chime. The EVIC/DID will display a “SERVICE TPM

SYSTEM” message for a minimum of five seconds. This

text message is then followed by a graphic display, with

“- -“ in place of the pressure value(s) indicating which

Tire Pressure Monitoring Sensor(s) is not being received.

If the ignition key is cycled, this sequence will repeat,

providing the system fault still exists. If the system fault

no longer exists, the Tire Pressure Monitoring Telltale

Light will no longer flash, the

SERVICE TPM SYSTEM

message will not be present, and a pressure value will be

displayed instead of dashes. A system fault can occur

with any of the following scenarios:
1. Jamming due to electronic devices or driving next to

facilities emitting the same radio frequencies as the

TPM sensors.

2. Installing some form of aftermarket window tinting

that affects radio wave signals.

3. Snow or ice around the wheels or wheel housings.
4. Using tire chains on the vehicle.
5. Using wheels/tires not equipped with TPM sensors.

498 STARTING AND OPERATING

Содержание 2015 Dart

























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2015 Dart

Отзывы:

Похожие инструкции для 2015 Dart

Бренды по названию

Популярные бренды

Dodge 2015 Dart, Руководство пользователя

Результаты поиска

Содержание 2015 Dart

Отзывы:

Похожие инструкции для 2015 Dart

Бренды по названию

Популярные бренды