Dodge 2015 Dart Скачать руководство пользователя страница 391

Страница: 391 / 664

CD/DVD DISC MAINTENANCE

To keep a CD/DVD in good condition, take the following

precautions:
1. Handle the disc by its edge; avoid touching the

surface.

2. If the disc is stained, clean the surface with a soft cloth,

wiping from center to edge.

3. Do not apply paper or tape to the disc; avoid scratch-

ing the disc.

4. Do not use solvents such as benzene, thinner, cleaners,

or anti-static sprays.

5. Store the disc in its case after playing.
6. Do not expose the disc to direct sunlight.
7. Do not store the disc where temperatures may become

too high.

NOTE:

If you experience difficulty in playing a particular

disc, it may be damaged (e.g., scratched, reflective coat-

ing removed, a hair, moisture or dew on the disc)

oversized, or have protection encoding. Try a known

good disc before considering disc player service.

RADIO OPERATION AND MOBILE PHONES

Under certain conditions, the mobile phone being on in

your vehicle can cause erratic or noisy performance from

your radio. This condition may be lessened or eliminated

by relocating the mobile phone antenna. This condition is

not harmful to the radio. If your radio performance does

not satisfactorily “clear” by the repositioning of the

antenna, it is recommended that the radio volume be

turned down or off during mobile phone operation when

not using Uconnect® (if equipped).

UNDERSTANDING YOUR INSTRUMENT PANEL 389

Содержание 2015 Dart

























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2015 Dart

Отзывы:

Похожие инструкции для 2015 Dart

Бренды по названию

Популярные бренды

Dodge 2015 Dart, Руководство пользователя

Результаты поиска

Содержание 2015 Dart

Отзывы:

Похожие инструкции для 2015 Dart

Бренды по названию

Популярные бренды