Docomo STYLE Series P-03A, Инструкция по эксплуатации

Страница: 86 / 581

84
Ph
one
bo
ok
Mail address You can store up to three mail addresses per Phonebook entry in
the FOMA terminal. You can set an icon for each mail address to
categorize mobile phone addresses, home addresses, and so on.
You can store only one mail address per Phonebook entry on the
UIM.
Enter a mail address.
p The mail address can consist of up to 50 half-pitch alphabets,
numerals or symbol characters.
p When the mail address is “phone number@docomo.ne.jp”,
store the phone number only.
p For the FOMA terminal, you can set a secret code as well. (See
page 91)
Select an icon.
p If you have stored a mail address in the FOMA terminal, another
“
<Mail address>” will appear in the Add-to-Phonebook
display. To store another mail address, select “ <Mail
address>”.
Address Enter a ZIP code Enter a postal address.
p You can enter up to 7 digits for the zip code.
p You can enter up to 50 full-pitch/100 half-pitch characters for the
postal address. Further, you can enter pictograms as well.
p
You cannot enter “
〒
” or “-” (hyphen) in the zip code.
Birthday Enter a birthday.
p
You can enter the birthday from January 1, 1800 through
December 31, 2099.
p You can check the birthday from Schedule. (See page 378)
Memo Enter a memo.
p You can enter up to 100 full-pitch/200 half-pitch characters.
Further, you can enter pictograms as well.
Image The stored still image is displayed when you call up the
Phonebook entry.
Select an item.
Select image . . . You can store a still image in Data Box.
Shoot image . . . You can store the shot still image.
Perform step 2 through step 3 on page 229.
p To release the stored still image, select “Release image”.
p The size of a still image you can store is Stand-by (240 x 428) or
smaller and up to 300 Kbytes in JPEG format or GIF format.
p
If you store a still image larger than 72 x 54 dots, it is displayed
shrunk on the detailed Phonebook display.
p If you store a still image larger than 240 x 180 dots, it is
displayed shrunk on the Call Receiving display.
p When “Disp. PH-book image” is set to “ON”, the stored still
image is displayed for an incoming call. However, when another
image is stored for “Picture”, that image is preferentially
displayed for the incoming call.
Memory No. Enter a memory number.
p
Enter a three-digit number of “000” through “999”.
p The lowest empty memory number “010” through “999” is
entered in advance.
If “010” through “999” are all occupied, the lowest empty
memory number from “000” through “009” is entered.
Ring tone You can set a ring tone for when a voice call or videophone call
comes in from the person stored in the Phonebook.
Select ring tone
Go to step 2 on page 96.
p
To release the stored ring tone, select “Release ring tone”.
Vibrator You can set a vibration pattern for when a voice call or
videophone call comes in from the person stored in the
Phonebook.
Select vibrator Select a vibration pattern.
p
To release the stored vibrator, select “Release vibrator”.