Docomo STYLE Series P-03A, Инструкция по эксплуатации

Страница: 418 / 581

416
Ne
two
rk Servi
ces
Recv. avoid.
(abroad) You can operate Receive Avoidance Set. from overseas.
YES Operate following the voice guidance.
p
When “Mode link setting” is activated, the confirmation
display appears telling that it is necessary to deactivate it.
Information
<Stand-by display> <Stand-by disp. Wide>
p See “Set Stand-by Display” on page 103 to set the Stand-by display in A Mode.
<Clock setting>
p See “Setting Clock Display” on page 114 to set the clock in A Mode.
<Ring tone set. for No. B>
p See “Select Ring Tone” on page 96 to set a ring tone for Number A and a mail ring
tone for Address A.
p
If a call comes in to Number B without notifying his/her caller ID, the ring tone set by
“Call setting w/o ID” sounds.
<Mode link setting>
p When “Mode link setting” is activated, you cannot switch the mode of 2in1 out of the
service area.
In Dual Mode, Number A dialing is the default setting when you make a
call from the Phonebook entry of A/common setting or the dialed/
received call record of Number A, and Number B dialing is the default
setting when you make a call from the Phonebook entry of B setting or
the dialed/received call record of Number B. Further, you can select a
phone number to be notified to the other party before making a call by the
following operations.
1
Enter a phone number
d
or
O o
( )
2
Number A or Number B
p
To cancel, select “Cancel”.
1
Call up the detailed display of a Phonebook entry, redial
item, dialed call record, received call record, Sent
Address, or Received Address.
2
i
( ) 2in1 dial Number A or Number B
p When you operate from Sent Address or Received Address, press
i
( )
and select “Dialing” to select a dialing type, and then select “2in1 setting”.
p To cancel, select “2in1 dial OFF”.
Make a Call in Dual Mode
When Entering a Phone Number to Make a Call
When Selecting Your Caller ID from Phonebook or Call
Records