Docomo STYLE Series P-03A, Инструкция по эксплуатации

Страница: 26 / 581

24
Befo
re
Usi
ng
th
e Ha
nd
set
The P-03A comes with two styles (W-Open style).
■ Normal Style
You can open the FOMA terminal easily by one-push key operation.
(One-push Open)
p
You can open it also manually without using the button.
p You need to close the FOMA terminal manually. If it does not close, open it fully and
then close it.
■ Horizontal Open Style
Hold down the part A and open the display part with the horizontal open
lever slid into the direction B. From the horizontal display, you can use
1Seg, Full Browser, and others.
p If the latch is not in a state of C when you open the display, re-open the FOMA terminal
after closing it once.
Styles
One-push open button
Horizontal open lever
Information
p
When you open the FOMA terminal by pressing the one-push open button, it might
not open fully depending on its direction.
You can set which operation starts for when you switch to Horizontal
Open Style from the Stand-by display.
1
m
Set./Service Other settings Work with style
Select an item.
Horizontal open menu . . .Shows Horizontal Open Menu. (See page 36)
1Seg . . . . . . . . . . . . . . . . . .Activates 1Seg. (See page 247)
Camera . . . . . . . . . . . . . . . .Activates the camera in Photo Mode. (See page 229)
OFF . . . . . . . . . . . . . . . . . . .Shows the Stand-by display (wide). (See page 103)
p
When you open the FOMA terminal by pressing the one-push open button, be careful
not to drop it by its rebound.
p
When you press the one-push open button in Horizontal Open Style, the FOMA
terminal will open in Normal Style after it is closed.
p
Before switching the styles, be sure to completely close the FOMA terminal. If you
operate the horizontal open lever in Normal Style or with the display part unlatched,
malfunction or damage may result.
p Some operating procedures and items on the display in Horizontal Open Style differ
from the ones described for Normal Style in this manual.
p When you switch styles while a confirmation display for selecting “YES/NO” is shown,
the confirmation display may be cleared.
Work with Style
Information
Information
p
When you switch styles from Main Menu or Horizontal Open Menu, the Stand-by
display appears regardless of the setting of this function.