Docomo STYLE Series P-03A, Инструкция по эксплуатации

Страница: 432 / 581

430
Ove
rs
eas Use
You can select whether to display, on the Stand-by display, the name of
the carrier you are currently connected to.
1
m
Set./Service Network setting Int’l roaming
Display operator name Display ON or Display OFF
The carrier’s name is displayed on the Stand-by display.
However, when you use the “DOCOMO” network, the carrier is
not displayed.
You can display whether the carrier you are currently connecting to
supports the circuit switching (CS)
※
1 and packet switching (PS)
※
2 .
※
1 The communication system used for voice calls, videophone calls, SMS, etc.
※ 2 The communication system used for i-mode, i-mode mail, etc.
1
m
Set./Service Network setting Status in the area
Delete all YES
l
( ) YES
Information
p When the “DOCOMO” network is available, you are preferentially connected to it
regardless of this setting.
p This setting is stored on the UIM.
p
You cannot set this function if the UIM is not inserted.
<Display Operator Name>
Displaying a Carrier Name on the Stand-by
Display
When you set to “Display ON”
<Status in the Area>
Confirming a Communication System
Carrier’s name
For an incoming voice call or videophone call during international
roaming, you can have the voice guidance played back to the caller to
that effect.
p
Even when you activate Roaming Guidance, the caller may hear the guidance in a
foreign language depending on the overseas carrier.
p Even when you deactivate Roaming Guidance, the caller hears a ringback tone set by
the overseas carrier.
p
You need to set this function in Japan.
1 m
Set./Service NW services
Set Roaming guidance Do the following operations.
<Set Roaming Guidance>
Setting Guidance during Roaming
Activate YES
Deactivate YES
Check setting You can check the setting contents of “Set Roaming guidance”.
YES