Docomo STYLE Series P-03A, Инструкция по эксплуатации

Страница: 476 / 581

474
Ap
pe
ndi
x/
Tro
ub
les
ho
ot
in
g
Error in image
Does not work correctly
…
The Flash movie had an error, so you could not play it
back normally.
F
Failed in transmission
…
An error occurred, so you could not perform iC
transmission.
Failed to authenticate
… An authentication error occurred.
Failed to get license file
…
Failed to obtain the license information about the PC
movie, so cannot be played back.
Failed to read
… An error occurred while reading information from the
microSD card.
Failed to read
Quitting
…
An error occurred when playing back the movie.
… The file cannot be read because you tried to play back
the file in the “Movable contents” folder with a UIM that
was not inserted when that file was saved. Insert the
UIM that was inserted when the file was saved, and try
again. (See page 39)
… The microSD card was removed while reading the
information from it. Insert the microSD card and try
again. (See page 342)
Failed to receive channel info
… Failed to obtain the i-Channel information because part
or all of it could not be obtained.
Failed to save
… An error occurred, so you could not copy the ToruCa
file.
… An error occurred, so you could not save.
… An error occurred, so you could not store.
Failed to send Ir data
… An error occurred, so you could not send the data
using infrared rays.
Failed to set
… An error occurred, so you could not set.
Format error
Insert microSD formatted
…
The format of the microSD card is incompatible with
P-03A. Use P-03A to format it. (See page 350)
I
i α
ppli stand-by display terminated due to security
error
… i-
α
ppli DX has forcibly been ended. (See page 287)
i α
ppli To function is not set
“
i α
ppli To” function is not set
… A check mark is not put for “Set
i α
ppli To”, so you
cannot start up the i-
α
ppli program. Put a check mark
and try again. (See page 287)
IC card function inactive
Unable to download
… IC card has been locked, so you could not download or
upgrade. Release IC Card Lock and try again.
(See page 306)
Image display is OFF
Cannot download
… “Set image display” is set to “OFF”, so you cannot
obtain the image. Set to “ON” and try again.
(See page 198)
Image in message will be deleted
…
The output-prohibited image from the FOMA terminal is
attached to the mail text, so deleted.
i-mode Center is busy
Please try again later (555)
… The line facility has trouble or the line is very busy. Wait
a while and try again.
i-mode mail service is busy
Please try again later (553)
… The line is very busy. Wait a while and try again.
Incomplete data
Unable to start
…
The i-
α
ppli program you tried to start up does not start
because partial data only is saved. Download the
whole i-
α
ppli program and try again.
(See page 284)
Input error (205)
…
The entered contents are wrong. Check the contents
and try again.
Input too long
… Too many entered characters to send. Decrease the
number of characters and send again.
(See page 186)
Invalid
Cannot resend
…
The address is invalid or the text exceeds the size that
can be entered, so you cannot re-send.
Invalid code
… The entered USSD is incorrect. Enter the correct one.
(See page 420)
Invalid data
… Received data has an error, so cannot be displayed or
saved. The received data is discarded.
… You cannot play back the following PC movies:
・ The data files other than Windows Media files or the
files with invalid contents
・
The data file whose image size is larger than 400
dots x 240 dots, image bit rate is higher than 2 Mbps,
or voice bit rate is higher than 384 kbps
・
If the server returns an unidentified response when
you try to download a savable data file.
・ When the streaming server is not supported by the
FOMA terminal (The streaming servers supported by
the FOMA terminal are Windows Media Services 4.1
and Windows Media Services 9 only.)
Invalid data (XXX)
… Received data has an error, so cannot be displayed or
saved. The received data is discarded.
A three-digit numeral is displayed for (XXX).
Error Message (E
-
I)