Docomo STYLE Series P-03A, Инструкция по эксплуатации

Страница: 373 / 581

371
Co
nveni
e
n
t Fu
ncti
on
s
The FOMA terminal supports “Multitask” that enables you to use up to
three functions such as menu functions (see page 34) at the same time.
By combining Multiaccess and Multitask, you can use following
functions simultaneously (see page 467 for the combination patterns of
Multitask):
■
Mail group
i-mode mail and SMS functions
■ i-mode group
Menu functions inside “i-mode group” on Main Menu
■
Setting group
Menu functions inside “Setting group” on Main Menu
■ Tool group
Menu functions inside “Tool group” on Main Menu
■
Other functions which do not belong to the groups
Voice call, videophone call, 64K data communication, etc.
<Multitask>
Multitask
i-mode group
Tool group
Mail group
Setting group
1
When a function is running
x
m
( )
Start another function.
For the icon of the group in use, “ ” or another mark is
added.
When a single function is used, “
” is displayed.
When multiple functions are used, “ ” is displayed.
The confirmation display appears asking whether to switch the functions. Select “YES” to
close the current menu function and the new menu function will be called up.
Start Another Function
When a function in the
Tool group is running
If another menu function in the same group has already been
called up
Information
p You are charged a call fee even when you are running other functions during a call.
p If a call comes in while another function is working, the call might not be received
correctly. In that case, “Record message” or “Call Forwarding Service” may start in a
shorter time than the ring time specified for them.
p If you use Multitask to switch functions while executing another function whose load of
processing is high, delay may occur in displaying operation, and so on.