Docomo STYLE Series P-03A, Инструкция по эксплуатации

Страница: 44 / 581

42
Befo
re
Usi
ng
th
e Ha
nd
set
Do not charge for long periods of time (several days) with the FOMA
terminal turned on.
p If you leave the FOMA terminal powered on for long periods of time during charging,
you may not be able to use the FOMA terminal for long duration as expected and the
low battery alarm may sound soon, because the FOMA terminal receives the power
from the battery pack after charging is completed. If this happens, charge the battery
pack correctly. When charging the battery pack again, first remove the FOMA terminal
from the AC adapter (or desktop holder) or DC adapter and then set it again.
Estimated usable time for battery pack
(The usable time for the battery pack
varies with the charging time and the remaining life of the battery pack.)
※ The continuous talk time is the estimated time that the FOMA terminal can be used for
calls when radio waves can be sent and received normally.
※ The 1Seg watching time is the estimated time for when radio waves can be received
normally with the Stereo Earphone Set 01 (option) connected.
※ The continuous standby time is the estimated time when radio waves can be received
normally. The standby time and talk/communication time could be about half of the
estimate and 1Seg watching time could be shorter depending on the charge level of
the battery pack, function settings, other ambient conditions such as temperature, and
the status of radio waves in the area (weak or no radio waves, for instance). When you
use i-mode communication, the talk/communication time and standby time will be
shorter. Further, even if you do not make calls or not execute i-mode communication,
the talk/communication time and standby time will be shorter if you watch 1Seg
programs, compose i-mode mail, start up a downloaded i-
α
ppli program or the i-
α
ppli
Stand-by display, execute data communication or Multiaccess, use the camera, or
play back music.
※ The continuous talk time and the continuous standby time may be shortened
depending on the network environment in the country you stay.
※
The continuous standby time for standstill is the average number of hours you can use the
FOMA terminal in standstill status when it is closed and can receive radio waves normally.
※ The continuous standby time for in motion is the average number of hours you can
use the FOMA terminal in the combined status of “standstill” “moving” and “out of the
service area” when it is closed, in an area where it can receive radio waves normally.
Estimated time for charging battery pack
※ The charging time is an estimate of time for when empty battery pack is charged with
the FOMA terminal turned off. The charging time will be longer if you charge the
battery pack with the power of the FOMA terminal turned on.
Continuous standby time
(FOMA/3G) Standstill: Approx. 640 hours
In motion: Approx. 400 hours
Continuous talk time
(FOMA/3G) Voice call: Approx. 200 minutes
Videophone call: Approx. 110 minutes
1Seg watching time Approx. 350 minutes (In ECO Mode: Approx. 500 minutes)
AC adapter Approx. 120 minutes DC adapter Approx. 120 minutes
3
Put the bottom of the FOMA terminal into the stopper of
the desktop holder (A) to fit the head to the lock claw,
and then depress the FOMA terminal until it clicks (B).
Check that the Call/Charging indicator lights in red.
When the Call/Charging indicator flickers, dismount the AC adapter and battery
pack from the FOMA terminal and then re-mount them for charging.
If the symptom persists, troubles with the AC adapter, desktop holder or battery
pack may be involved, so consult a handling counter such as a docomo shop.
p
The charging confirmation tone (see page 99) sounds when charging starts and
ends. However, it does not sound when the power is off or during Manner Mode
or Public Mode (Drive Mode).
p Be sure to set the FOMA terminal firmly onto the desktop holder. Also, be careful
that the connector cover or a commercial strap is not caught between the FOMA
terminal and desktop holder.
Charge with AC Adapter and Desktop Holder
1
Plug the connector of AC
Adapter horizontally with its
engraved side facing down
into the connector terminal of
the Desktop Holder.
2
Pull out the AC Adapter's plug,
and plug it into a household
power socket of 100 V AC.
Call/Charging
indicator
Desktop Holder
Engraved surface
(down side)
AC Adapter
Stopper
Power
socket
Lock claw
AC Adapter’s
plug
Connector