Docomo STYLE Series P-03A, Инструкция по эксплуатации

Страница: 48 / 581

46
Befo
re
Usi
ng
th
e Ha
nd
set
This function corrects the time of the FOMA terminal according to the clock information
obtained from the network when you turn on the power.
The time is corrected when you show the Stand-by display with “Auto time adjust ON”
set.
If the time is not corrected for a while after you turn on the power, turn it off and then on
again.
p Some few second errors might occur. You might not be able to correct the time depending
on the radio wave conditions, or the i-
α
ppli program set for the i-
α
ppli Stand-by display.
p
When you receive the clock information overseas and the time difference correction
information differs from the previously received one, “Time is adjusted” is displayed and
the time difference is corrected automatically. Press “OK” to update the time and show
Redial, Dialed Calls, Received Calls, sent/received mail messages and others in local
time.
p Depending on the network overseas, the time difference might not be correctly
adjusted. In such a case, set a time zone manually.
You can display the time of the specified area on the Stand-by display.
1
m
Set./Service Clock World time watch
ON or OFF
Use
M o
to select an area and press
O o
( ).
About date/time correction function
Information
p Unless Set Time is set, the functions which use the clock such as Schedule do not
work correctly. Further, the date/time for redial items and received call records are not
stored.
p The set time is retained even when the battery pack is replaced, however, it might be
reset if the battery pack is left removed for a long time. In that case, charge the FOMA
terminal and then perform the clock setting.
p
When “Time zone” is set to other than “GMT +9” or the time difference is corrected
overseas, the sub clock (Japanese date/time, etc.) is displayed on the Stand-by
display.
p
This function supports clock settings from 00:00 on January 1, 2008 through 23:59 on
December 31, 2037.
<World Time Watch>
Displaying World Time
You can advance the time displayed for the overseas country you stay
and for a region of World Time Watch by one hour.
1
m
Set./Service Clock Summer time ON or OFF
You can set the FOMA terminal to send your phone number to the called
party’s phone when dialing. Your phone number is important
information, so take utmost care when notifying your phone number.
This function is available only when the other party’s phone supports
Caller ID.
You can set whether to notify your caller ID on the network.
1 m
Set./Service NW services Caller ID notification
Do the following operations.
Information
p
World Time Watch does not appear when “Display setting”
→
“Clock”
→
“Stand-by
clock/Stand-by clock Wide” → “Position” is set to “OFF”, or when you use the FOMA
terminal overseas.
Summer Time
<Caller ID Notification>
Notifying the Other Party of Your Phone
Number
+ m - 1 - 7
Set Caller ID Notification to Network
Activate ON or OFF
Check setting You can check the setting contents of “Activate”.