Docomo STYLE Series P-03A, Инструкция по эксплуатации

Страница: 553 / 581

20
For packet communication, you can specify whether to notify your caller ID (caller ID notified/not notified).
The caller ID is your important information; so, take a great care to notify your caller ID. You can use AT
commands (
¢
DGPIR command) to specify “caller ID notified/not notified” before dial-up connection.
1
Start the communication software such as “Hyper Terminal”.
≥
See page 17 for details on how to operate “Hyper Terminal”.
2
Use the
¢
DGPIR command (see
page 35) to specify “caller ID
notified/not notified”.
≥
To automatically add “184 (not notify)” for outgoing or
incoming call, enter the following:
AT
¢
DGPIR=1
≥
To automatically add “186 (notify)” for outgoing or incoming call, enter the following:
AT
¢
DGPIR=2
3
Confirm that “OK” appears on the
display.
■ Resetting/Confirming the access point name (APN) settings
You can use AT commands to reset/confirm the access point name (APN) settings.
Resetting access point name (APN)
The access point name (APN) for cid1 returns to “mopera.ne.jp” (default) and for cid3 returns to “mopera.net” (default); the settings for
cid2 and cid4 through cid10 are reset to being unregistered if you reset them.
(Entry method)
AT+CGDCONT=
(When resetting all the cid contents)
AT+CGDCONT=<cid> (When resetting only a specific cid)
Confirming access point name (APN)
The currently specified access point name appears on the display.
(Entry method)
AT+CGDCONT?
Set Caller ID Notified/Not Notified
Information
≥
When using DOCOMO Internet access service “mopera U” or “mopera”, you need to set your caller ID to be “notified”.
≥
If the entered AT command is not displayed, enter “ATE1 ”.