Docomo FOMA SH903i, Руководство пользователя

Страница: 126 / 526

124
e06_dv40_7e.fm
Sound/Screen/Light Settings
Set ring tone to sound from earphone instead of the FOMA terminal speakers when the
flat-plug earphone/microphone with switch (sold separately) is connected.
If no flat-plug earphone/microphone with switch is connected, the ring tone will sound from the speakers even
when set to
Earphone only .
Use Manner mode to avoid disturbing others when in public. A single key operation
silences the FOMA terminal.
Settings vary for each mode as indicated below.
2
Enter duration and press
t
.
Enter 01 to 30 seconds for Mail ring tone and 01 to 60 seconds for PushTalk tone.
Enter between 01 and 30 seconds for Position location sound, Position location notice and Location
provision/accept, and between 01 and 20 seconds for Location provision/notify for GPS function.
Note
PushTalk ring duration cannot be selected when Set auto answer is set to ON for PushTalk.
When Location provision is allowed/chosen
“When Location provision is allowed” is the case when GPS Service settings are set to
許可
(Always allow)
or when Location usage setting (imadoko-search setting) accessed by iMenu
→
料金＆お申込・設定
(Charges & Subscription, Settings)
→
オプション設定
(Options)
→
位置情報利用設定
(Location usage
setting) is set to
許可
(Always allow).
“When Location provision is chosen” is the case when GPS Service settings are set to
毎回確認
(Always
choose) or when Location usage setting (imadoko-search setting) accessed by iMenu
→
料金＆お申込・設
定
(Charges & Subscription, Settings)
→
オプション設定
(Options)
→
位置情報利用設定
(Location usage
setting) is set to
毎回確認
(Always choose).
Refer to P. 285 for details on GPS Service settings.
Ring Output
Sounding Ring Tone in Earphone Only
Default setting Earp.+speaker
1
In stand-by, press
t15
and select a ring tone output device.
Note
The phone ring volume in the earphone/microphone is set using Phone ring volume . When the volume is
set to Silent , no ring tone sounds from the earphone.
Do not wind the earphone/microphone cord around FOMA terminal. Internal antenna may not work properly.
Fully insert the earphone/microphone plug. Interrupted sound, static or loud noise may result when only
partially inserted.
The following are not malfunctions.
Interrupted sound or static when the earphone/microphone is only partially inserted during a call.
A popping sound upon turning power on.
Manner Mode
Silencing Handset
Default setting OFF
Function Normal Silent Original *
1
Record message, Vibrator ON OFF ON
Ring tone, Mail ring tone Silent Silent Silent
Earphone only
1
Earphone and speaker
2
dv40̲e.book 124 ページ ２００６年１０月１１日 水曜日 午前８時３１分