Docomo FOMA SH903i, Руководство пользователя, Страница: 457 / 526

455
e22_dv40_7e.fm
Appendix/Using with External Devices/Troubleshooting
Continued on next page
??
Set date and time to update software when downloading takes too much time or the server is
extremely congested.
A screen asking to end or not appears if
H
is pressed. If download is aborted, data downloaded up to
that point is deleted. (Cannot operate during software rewrite.)
When Server is busy appears after Negotiating , press
1
[Reserve]. Refer to
steps 2 to 4 of “Updating Software Later” on P. 455 for subsequent steps. Press
2
[Cancel] to not reserve. A screen appears prompting to stop. To stop, select
Yes and press
t
.
2
Press
t
[Agree].
Note
When Preparing update. Please wait , Software update , Software Update Rewriting or Rewriting is
complete. Ready to reload? appears during steps 1 and 2, the handset status is the same as when outside
the service area and calls cannot be answered. Calls can be answered in other screens. The previous
screen reappears when the call is ended.
While performing steps 1 and 2, received i-mode mail and Message R/F are held at i-mode center. Received
SMS is held at SMS center.
When Update complete or Check update appears in stand-by after software update, press
t
. If terminal
security code is entered when software update is incomplete, a message stating so appears. Press
t
and
retry update.
Updating Software Later
<Reserve>
1
Perform steps 1 to 5 on P. 452 and press
2
[Reserve].
Schedule selection screen appears.
The time and date are the same as the server time.
To cancel operation, in steps 1 to 4, press
H
, select Yes and press
t
.
2
Select preferred date/time and press
t
.
A confirmation screen appears.
Alternatively, select the date and time after selecting Other date/time and accessing the server.
Select the date and press
t
, then select the time and press
t
.
In the screen to select times, schedule status appears as
○
:Avail and
△
:Limited for each time slot.
Select a time and press
t
to reconnect to the server and show schedule candidates. Select a
schedule and press
t
.
3
Select Yes and press
t
.
The preferred date/time is reserved.
4
Press
t
[Agree].
dv40̲e.book 455 ページ ２００６年１０月１１日 水曜日 午前８時３１分