Docomo FOMA SH903i, Руководство пользователя, Страница: 134 / 526

132
e06_dv40_7e.fm
Sound/Screen/Light Settings
Set to turn on/off the backlight for keypad.
The duration when set to Light follows the Display light time setting.
Note that continuous stand-by time decreases when set to light.
Turn off the display when FOMA terminal is not in use for a set period of time to conserve battery power.
1
In stand-by, press
t2641
and select item.
2
Enter from 01 to 99 seconds and press
t
.
For charging and i-mode, select
1
[Same as normal] or
2
[As scrn dsp time]. For Videophone,
select
1
[Same as normal] or
2
[ON].
Note
Light duration (seconds) can only be set for Normal .
Increasing light duration shortens continuous stand-by time.
When the same time is set for Normal Display light time and Screen display time, Screen display time is
prioritized.
The display brightness during a Videophone call follows the setting of User set in Power saver set. When
Videophone in Display light time is set to
Same as normal , the brightness is adjusted to the setting of
Brightness. When ON is set, the brightness is adjusted to Brightness 2.
Backlight time in video player applies to the light duration at Flash movie or movie playback.
When Flash movies or animated GIFs are set as stand-by and Power saver mode is exited to return to
stand-by, the movie or animation resumes playback from the beginning.
If Backlight time for Image Viewer , video player and Chara-den player are set to As light setting , Normal
in Display light time is applied.
Light is always lit for Slideshow , Shoot still picture , Character reader and Bar code reader regardless of
the display light time settings.
Light duration is prioritized as follows when multiple are set. If Display light time is set to ON for Videophone
and Videophone is used while charging, Display light time is set to ON regardless of the setting for Charging.
Lighting the Keypad
<Keypad Light Setting>
Default setting
Light
1
In stand-by, press
t2645
and
1
[Light].
Setting Image Display Time
<Screen Display Time>
Default setting
1 minute
1
In stand-by, press
t2642
and select time before activating
Power saver mode.
Note
In Power saver mode, the display will turn on when any key is pressed.
Normal
1
Video-phone
3
Charging
2
i-mode
4
Priority (high
→
low)
Light duration Charging
→
Videophone/i-mode
→
Normal
30 seconds
1
3 minutes
4
15 minutes
7
1 minute
2
5 minutes
5
20 minutes
8
2 minutes
3
10 minutes
6
dv40̲e.book 132 ページ ２００６年１０月１１日 水曜日 午前８時３１分