Docomo FOMA SH903i, Руководство пользователя

Страница: 516 / 526

31
Manual for Data Communication dv40.fm
ATA Performs incoming process for
packet or 64K data if entered
when receiving the data.
*2
Enter “ATA184
o
” (arrival call action for
anonymous call) or “ATA186
o
” (arrival call
action for identified call) while receiving
packets.
RING
ATA
o
CONNECT
ATD
Establishes communication.
*2, 3
Packet transmission ATD
*
99
***
<cid>#
o
When “ATD
*
99#” is entered:
Uses <cid>=1 (default setting). (When
<cid> is not entered, setting becomes
“<cid>=1”.)
When syntax starting with
“ATD184
*
99
***
<cid>#” is entered:
“184” is added to host (APN) defined by
specified <cid>. (Alternatively, “186” can
be added by same operation to turn caller
ID sending to ON.)
64K data communications ATD
[parameter] [phone number]
o
ATD
*
99
***
1#
o
CONNECT
ATE<n> Sets whether the FOMA terminal
returns echo of AT commands
sent from the PC.
*1
n=0: Does not return echo
n=1: Returns echo (default setting)
Normally, set to n=1. If the PC has an echo
function, set to n=0. ATE1
o
OK
ATH Disconnects line when entered
during packet transmission or 64K
data communications.
*2
―
(During
communication)
+++ (Does not
appear.)
OK
ATH
o
NO CARRIER
ATI<n>
Displays the verification code.
*2 n=0: NTT DoCoMo
n=1: Displays abbreviated product name
(FOMA SH903i)
n=2: Displays the product version in a format
such as “VerX.XX”
n=3: Displays each element of ACMP signals
n=4: Displays details of the communication
functions provided in the FOMA terminal
ATI0
o
NTT DoCoMo
OK
ATO Returns to online data mode from
online command mode during
communication.
*2
―
ATO
o
CONNECT
ATQ<n> Sets whether to display result
codes.
*1
n=0: Displays result codes (default setting)
n=1: Does not display result codes ATQ0
o
OK
ATV<n> Sets manner of displaying result
codes.
*1
Displays all result codes with numbers or text.
n=0: Displays result codes with numbers
n=1: Displays result codes with text (default
setting)
ATV1
o
OK
ATX<n> Sets whether to include speed in
the CONNECT display when
connecting. Also detects busy
tone or dial tone.
*1
Busy tone detection:
Sends BUSY response when number dialed
is busy.
Dial tone detection:
Determines whether FOMA terminal is
connected.
Speed display:
Sets whether to include speed in the
CONNECT display when connecting.
n=0: No busy tone detection, no dial tone
detection, no speed display
n=1: No busy tone detection, no dial tone
detection, speed display
n=2: No busy tone detection, dial tone
detection, speed display
n=3: Busy tone detection, no dial tone
detection, speed display
n=4: Busy tone detection, dial tone detection,
speed display (default setting)
ATX1
o
OK
AT Command Overview Parameter/Explanation
Execution
Example
[M]
[M]
Number cannot be dialed if characters
other than 0 to 9,
*
, #, +, A, a, B, b, C, c, D,
d, hyphens (-), spaces, T, t, P, p, !, W, w,
@, or commas (,) are included. Characters
highlighted with
can be entered but
are ignored during dialing.
[M]
[M]
[M]
[M]
[M]
[M]
[M]
Manual for Data Communication dv40.fm 31 ページ ２００６年１０月１０日 火曜日 午後８時４６分