Docomo FOMA SH903i, Руководство пользователя

Страница: 461 / 526

459
e22_dv40_7e.fm
Appendix/Using with External Devices/Troubleshooting
When data that can cause malfunctions are detected, a warning screen appears.
J
Scanned results display
※
Warning screens other than the above may appear depending on the contents of pattern definitions.
J
Displaying detected errors
Displaying Scanned Results
Level 0 Level 1 Level 2 Level 3 Level 4
Displaying,
activating, and
calling are available.
Appears when there
was an error
previously, but there
is no error presently.
Select
Agree and
press
t
to show,
activate or call.
Select No and press
t
to show, activate
or call.
Select
Yes and
press
t
to cancel
the operation.
Displaying,
activating, and
calling are not
available. Select
Agree and press
t
to end.
Displaying,
activating, and
calling are not
available. Select
Yes , press
t
,
select Yes in the
delete confirmation
screen and press
t
to delete the data.
Select
No and press
t
to end without
deleting.
Displaying,
activating, and
calling are not
available. Select
Agree and press
t
to delete the data.
In the warning screen, select Detail and press
t
to show error names. When no error
name exists for the contents of the pattern data, Detail does not appear.
Up to five error names appear. Etc appears below the fifth error name when more than
six are detected. If same error is detected more than once, it is only listed once.
Checking Version of Pattern Definitions
<Version>
1
In stand-by, press
t374
.
dv40̲e.book 459 ページ ２００６年１０月１１日 水曜日 午前８時３１分