Docomo FOMA SH903i, Руководство пользователя, Страница: 58 / 526

56
e03_dv40_7e.fm
Phone/Videophone
J
Enabling/Disabling Chaku-moji display
<Message display>
1
In stand-by, press
t571
.
2
Select a number, press
i
[Edit], enter a message and press
t
.
To check a saved Chaku-moji message, select a number and press
t
.
Default setting With caller ID
1
In stand-by, press
t572
and select Chaku-moji display
method.
Dialing with Chaku-moji Message
<Chaku-moji>
1
In stand-by, enter the other party’s phone number and press
C6
[Chaku-moji].
Refer to P. 110 when calling with Chaku-moji from the phonebook.
2
Select a Chaku-moji message.
3
Press
s
[Phone]/
i
[V.phone].
Note
The ten most recently sent messages are recorded as Sent messages.
Even if a call is shorter than the set ringing time of the Set mute ring time , Chaku-moji is displayed and
charges are applied.
Depending on the signal strength, sending results may not be displayed even if the other party has received
Chaku-moji. In this case, charges are applied.
For overseas usage, Chaku-moji cannot be sent/received.
On Redial voice call , Chaku-moji used when Videophone was dialed will be automatically sent.
Chaku-moji does not support PushTalk.
To display all
1
To display ones only from callers saved in the phonebook
2
To display ones only from Notify caller ID callers
3
To not display
4
To create a new message
1
→
enter a Chaku-moji message
→
t
To select from saved Chaku-moji messages
2 →
select a Chaku-moji message
→ t
To select from Sent messages
3 →
select a Chaku-moji message
→ t
To delete one Sent messages entry, select a Chaku-moji
message and press
C1
. To delete all Sent messages
entries, press
C2
.
If Chaku-moji reaches the recipient,
Transmission completed appears and
transmission charges are incurred.
dv40̲e.book 56 ページ ２００６年１０月１１日 水曜日 午前８時３１分