Docomo FOMA SH903i, Руководство пользователя, Страница: 458 / 526

456
e22_dv40_7e.fm
Appendix/Using with External Devices/Troubleshooting
J
When the reserved date and time arrives
The screen on the left appears in the stand-by display. Software update will
automatically start. Software will not update if the handset is turned off when
the reserved time arrives.
Refer to step 1 of “Updating Software Immediately” for subsequent steps.
After approximately five seconds or pressing
t
[Agree], software update
automatically starts.
Before software updates, make sure the handset is in a place with a strong signal. Software is not updated if
the battery level is below the necessary level to update software at the reserved date and time.
Software is not updated if the handset at the reserved date and time is performing functions such as sending
mail, i-mode, i-
a
ppli, using menus, connecting to an external device, or is in Self mode/All lock/Function lock/
Omakase lock. When receiving mail, software update begins after mail reception is completed.
If the alarm or another function takes place at the same time (any time excluding Auto manner mode disable),
alarm or the function is prioritized and software is not updated.
When the FOMA terminal is turned off at the reserved date and time for software update or when the FOMA
terminal is turned off right after the update starts, the update will be canceled.
If a call is in progress at the set date and time for software update, software update starts when returning to
stand-by within ten minutes. Software is not updated if ten minutes pass before returning to stand-by.
If “Delete all data (Delete user data)” (
n
P. 385) is performed after reservation is completed, the software
update is not activated when the reserved time arrives. Reserve the software update again.
Note
Incoming calls can be received during the above operation. The previous screen reappears when the call is
ended. Received i-mode mail and Message R/F are held at i-mode center. Received SMS is held at SMS center.
Confirming/Changing/Canceling Reservation
1
In stand-by, press
t38
, enter terminal security code and press
t
.
Reserved date and time appears.
Note
Incoming calls can be received during the above operation. The previous screen reappears when the call is
ended. Received i-mode mail and Message R/F are held at i-mode center. Received SMS is held at SMS
center.
To confirm
1
To change
2 →
OK
→ t
. Preferred date screen appears.
Refer to steps 2 to 4 of “Updating Software Later” on
P. 455 for subsequent steps.
To cancel
3 →
Yes
→ t →
OK
→ t → t
after The
reservation is canceled appears
dv40̲e.book 456 ページ ２００６年１０月１１日 水曜日 午前８時３１分