Docomo FOMA D902i, Руководство пользователя, Страница: 88 / 500

86
Ma
king/Receiving Video-phone Calls
2
1
to
9
,
0
,
(
or
#
Adjusting the brightness/color density/flicker of outgoing images
Camera Settings
You can adjust the brightness and color density in 5 levels. Also, you may be able to control the flicker of
images, if it occurs, by making settings according to the power supply frequency in your area.
･
This setting can be changed only while sending your self image.
･
The brightness and color density may be unable to be changed depending on the setting for Screen
Mode/Effect.
･
The settings are retained even after the call is finished.
1
m2
during a call
z
Select an item
■ Adjusting brightness and color density:
■ Adjusting flicker:
3 z 1
to
3
･
The flicker adjustment setting for Camera will reflect changes in this setting.
Sending the still image/camera-off image
Select a still image or the image displayed as
Camera off
(camera-off image).
･
This setting is not available while the frame is being sent (
☛
P85).
･
Only the still image that is 176 x 144 (QCIF) or smaller and permitted to output from FOMA terminal
can be set. Images prohibited from being output from FOMA terminal (File restriction)
☛
P350
1
m3
during a call
z
Select an item
■
Sending the camera-off image:
3
･ When the camera-off image is set, the substitute image set in Image Setting is sent.
However, if Chara-den is set as the substitute image, the default image (camera-off image) is
sent.
Default Brightness: Level 3 Density: Level 3 Flicker adjustment: Auto
･
Press
&
to switch the pages.
The effect currently applied
a
2 z
Highlight
Brightness
slider
z &
b
d
to highlight Density slider
z & z p
･
Your self image is displayed on the main screen while adjusting.
You can check the change of brightness or color density as you
shift the slider’s position.
･
If you do nothing on the terminal for some time after adjusting, the
settings are not changed and the talking screen reappears.
Set
ting i
m
ages to b
e
se
nt
to
the other
party