Docomo FOMA D902i, Руководство пользователя, Страница: 152 / 500

150
Safe
ty sett
ings
Security code
Security codes available with FOMA terminal
Some FOMA terminal functions for convenient use require the entry of security codes. There are the
network security code for use in network services and DoCoMo e-site, password for i-mode in addition
to the terminal security code for various functions. Fully use your FOMA terminal by choosing the
security code to suit your needs.
Terminal security code
The default terminal security code is “0000”, which can be changed to a code of your own choice.
･
Please be notified that, if you forget the terminal security code, you need to bring FOMA terminal*
1
,
the UIM (FOMA card) in use and the identification (driver’s license, etc.) to a DoCoMo Shop.
*1 In case the terminal is not purchased by the subscriber, it may not be accepted.
Network security code
Network security code is the 4-digit code that is set when you subscribed to FOMA terminal for usage of
network services and various procedures for the DoCoMo e-site.
･
If you forgot the network security code, contact “General Inquiries” on the back of this manual.
DoCoMo Shops make subscription after confirming the subscriber’s identification based on a
certificate such as the driver’s license. If you have “User ID” and “Password”, you can make
subscription by accessing to DoCoMo e-site from the PC.
･
Please refer to the back of this manual for “DoCoMo e-site”.
PIN1 code/PIN2 code
The PIN1 and PIN2 codes can be set for the UIM. The default PIN1 and PIN2 codes are “0000”, which
can be changed to a code of your own choice.
The PIN1 code is the 4 to 8 digits security code entered to confirm the user every time the UIM is
inserted to FOMA terminal or the power of FOMA terminal is turned on to protect your FOMA terminal
from unauthorized use by the third party. Entering the PIN1 code enables making or receiving calls and
FOMA terminal operations. The PIN2 code is the 4 to 8 digits security code required when using or
requesting the issue of a user certificate, resetting the total call cost or changing the setting of Reset Call
Cost.
i-mode password
A 4-digit i-mode password is required to store/delete sites in My Menu and apply to/cancel message
services or i-mode pay sites. The default i-mode password is “0000”, which can be changed to a code of
your own choice (in addition, there may be passwords required by individual information providers).
･
Please be notified that, if you forget the i-mode password, you need to bring the identification
(driver’s license, etc.) to a DoCoMo Shop.
INFORMATION
● To prevent tampering, change the terminal security code, PIN1 code, PIN2 code or i-mode password to a code
of your own choice after the completion of the application for subscription. Be sure to remember the set
security codes.
● Be sure to avoid recognizable numbers such as the last 4 digits of the phone number and not to be revealed
the security codes or password by others.
● If a wrong terminal security code is entered 5 times consecutively, the power is automatically turned off.
Sec
u
ri
ty codes ava
il
able
w
it
h
FOMA ter
m
in
al