Docomo FOMA D902i, Руководство пользователя, Страница: 46 / 500

44
Be
for
e
Using D90
2
i
Setting the low battery alert not to sound
Low Battery Alert
1
m815
2
Press
2
･
To set the alert:
1
INFORMATION
● When the battery almost runs down during a call, even if OFF is set, the low battery alert sounds from the
earpiece.
Turning the power on/off
Power ON/OFF
･
If the power is turned on for the first time, a confirmation screen is displayed asking whether to
perform Software Update. Note that the battery needs to be charged enough when performing.
Please be sure to refer to “Updating Software” before performing.
☛
P478
1
f
(for over 2 seconds)
The wake-up screen appears and then the stand-by display is displayed. Displaying the wake-up
screen may take some time.
･
If Quick Start-up is set to
ON
, the time until the stand-by display is displayed becomes short.
1
f
(for over 2 seconds)
INFORMATION
● Calls may be cut off even when is indicated and you are not moving.
● When Reset Call Cost is set to ON , entry of the PIN2 code is required.
Default ON
Turning the power on
Turning the power off
Battery
level icon
･
If the date and time have not been set, a message indicating
that is displayed. Press
o
to set the date and time.
･
If no UIM is inserted, a message indicating that insertion
of the UIM is required is displayed. Turn the power off,
insert the UIM and then turn the power back on.
･
When PIN1 Code ON/OFF is set to
ON
, enter the PIN1 code.
･
The following items can be changed:
･ Stand-by image
☛
P132 ･ Battery level icon
☛
P144
･ Display format of the time
☛
P147
Display of received
signal level
Status Strong Medium Weak Outside the service
area and where radio
waves are hard to
reach
is indicated while reading the UIM
and disappears when reading is
completed.
Date/day/time
Received
signal level
The stand-by
image is
displayed.
Po
we
r ON/
O
F
F