Docomo FOMA D902i, Руководство пользователя, Страница: 158 / 500

156
Safe
ty sett
ings
INFORMATION
●
If the phonebook data in which a pause (P) or timed pause (T) has been set is registered to the sender’s
information, the information registered after the pause (P) and timed pause (T) is deleted.
Setting Remote Lock
Remote Lock is activated by making a voice call to FOMA terminal under the preset conditions.
･
Send your caller ID and make a call to FOMA terminal.
･
In the following cases, the counting of incoming calls is not started and Remote Lock is not set.
・
The other party receives a call (including the case that the call is handled by Response and Hold or
Answer Machine or received by Auto Answer).
・ FOMA terminal is busy or a PushTalk call is being talked.
・ The call cannot be received because FOMA terminal is outside the service area, the power is
turned off or Self Mode is on, etc.
･
If the following states occur before making the specified number of calls, the time counting is reset.
・ The other party receives a call (including the case that the call is handled by Response and Hold or
Answer Machine or received by Auto Answer).
・
The power of FOMA terminal is turned off.
・
The set monitoring period has passed.
･
Even if All Lock or IC Card Lock is set, Remote Lock can be set.
･
When Remote Lock is set while Key Lock is on (when Key Lock Setting is set to Lock even slide open ),
you can cancel All Lock, but you cannot make emergency calls.
1
Make a voice call to FOMA terminal under the conditions set
The guidance notifying that it is locked is played and Remote Lock is set for FOMA terminal.
■
Canceling:
Enter the terminal security code in FOMA terminal with Remote Lock set to cancel All Lock and
then release IC Card Lock.
･
Canceling IC Card Lock
☛
P318
INFORMATION
● The count of incoming calls is only effective for the first call made from the specified sender. After the counting
has been initiated, additional received calls from other senders are not counted.
● Even if a call is rejected, or transferred by Voice Mail Service or Call Forwarding Service (excluding when the
ringing time is 0 sec ), that call is counted as an incoming call.
●
When Answer Machine or Auto Answer is set, end the call before Answer Machine or Auto Answer starts.
● Even if a call or PushTalk call arrives while Remote Lock is on, the call is disconnected. If a call arrives from
phone numbers that are set as sender, the guidance informing that Remote Lock is on is played and then the
call is disconnected.
Menu 894
Preventing making/receiving calls
Self Mode
Disable all functions that require communications such as making or receiving calls/PushTalk
calls or sending or receiving mails. Infrared data communication and infrared remote control are
also disabled.
Default OFF
S
e
lf
M
o
d
e
Note: The miniSD memory card is not included in the bundle and needs to be purchased.
☛
P339