Docomo FOMA D902i, Руководство пользователя, Страница: 236 / 500

234
Ma
il
● An error message for address unknown etc. may not be received when mail is sent to addresses other than
DoCoMo.
● When there is not enough available storage space, or the maximum number of saved items is exceeded,
i-mode Mail cannot be composed. Delete unnecessary i-mode Mail and/or SMS from Unsent messages.
☛
P267
Adding receivers
Add Address
You can send i-mode Mail to up to 5 addresses at one time (Multi-address transmission).
･
There are 3 address types: (TO), (CC) and (BCC).
: The main receiver
: The receiver to which you want to send a copy of the mail
: The receiver to which you want to send a copy of the mail but which you do not want to be
known to other receivers
･
Mail with no address entered in field cannot be sent.
･
The mail address entered in field is not shown to other receivers.
1
Highlight the address field on the mail composition screen
z a
■
Adding CC and BCC:
a
m7
on the mail composition screen
z
Select an input method
b
Select CC or BCC
z
Enter a mail address
･
Also TO can be selected.
･
When you have added by selecting Mail group , TO, CC and BCC are set as registered for
the mail group.
■ Changing TO, CC and BCC: Highlight an address field
z m9 z
Select an address
type
■
Deleting the added address field: Highlight an address field
z m8 z
Select Yes
･
Only the address in the field is deleted when there is only one field.
2
Enter the address in the added field
z p
･
The operation is the same as when there is only one address field.
INFORMATION
● The mail address entered in field and field can be seen at the receiver side. However, it may not
be displayed depending on the terminal, device, or mailing software.
●
When sending of mail to some addresses fails, an error message is displayed. Pressing
o
may display a list of
mail addresses for which transmission failed.
Address field is added.
･
Repeat operation until the number of fields you want is added.
Co
m
pose Messa
g
e