Docomo FOMA D902i, Руководство пользователя, Страница: 286 / 500

284
Ma
il
INFORMATION
●
Depending on signal conditions, characters may not be displayed correctly at the receiver side.
●
The font type and whether to receive the delivered report are set in SMS Setting beforehand. You can also
change the settings for the delivered report and storage period in the SMS Center while composing SMS.
●
When transmission is completed correctly, SMS is saved in Outbox folder of Outbox. However, when the
received mail matches the criteria specified in Sort Criteria, it is saved in the specified folder. When there is not
enough available storage space, or the maximum number of saved items is exceeded, the oldest sent mail is
overwritten. Be sure to protect sent mail you want to keep.
●
When transmission fails, an error message is displayed and SMS is saved in Unsent messages folder of Unsent
messages. You can edit and send the SMS from Unsent messages folder.
☛
P248
●
When you set the delivered report to Request and send SMS, you will receive a delivered report that notifies you
that the message has been received by the other party’s FOMA terminal. The delivered report is saved in
Inbox.
●
Even if Not notify is set in Caller ID Notification, the caller ID is sent to the receiver when SMS is sent.
●
If you enter some symbols (
｜＾ { } [ ] ˜
and ￥ ) when the font type is English, the number of characters that can be
sent is reduced. In this case, you may not be able to send the message even if the number of characters is less than
the maximum number of characters. Reduce the number of characters and send it again.
●
When there is not enough available storage space, or the maximum number of saved items is exceeded, SMS
cannot be composed. Delete unnecessary i-mode Mail and/or SMS from Unsent messages.
☛
P267
When SMS is received
Receive SMS
When there is incoming SMS, it is automatically received and you are informed by the screen
display, ring tone, vibrator, and/or call indicator. The received SMS is saved in Inbox.
･
Maximum number of received messages that can be saved
☛
P36
1
An SMS message is received
flashes and Receiving message... is displayed.
When reception is completed, the mail ring tone sounds, the call indicator lights/flashes, and the
reception result screen is displayed.
･
Press
f
while receiving the message to stop reception.
･
If you do not press any key for about 15 seconds after the reception result screen is displayed or
until the ring tone stops, the display returns to the screen displayed prior to reception. To return to
the previous screen immediately, press
c
.
Reception
completed
Flashes
: Unread SMS exists.
: Unread SMS and i-mode Mail exist.
Number of received SMS
When reception fails, “ × ” is indicated after
Messages . To receive unreceived messages,
perform Check SMS.
Reception result scrolls.
Reception result screen Receiving screen
Recei
ve SMS