Docomo FOMA D902i, Руководство пользователя, Страница: 134 / 500

132
Sounds/Di
s
plays
/L
ig
hts
Settings
3
Select each item to set
4
Press
p
The personalized silent mode is set.
Displays/Lights Settings
Changing the stand-by display
Stand-by Display Setting
You can change the stand-by display to your favorite image.
･
Depending on the image, video/i-motion, Chara-den or i-
α
ppli, settings for the stand-by display will
be disabled if you do not insert the same UIM as used when downloading the data (the UIM
operation restriction function).
･
While All Lock or PIM Lock is on (when the data which is subject to PIM Lock is set to the stand-by
display), the set stand-by image is canceled and the image of the default setting is displayed
temporarily. The set stand-by image reappears when lock is canceled. However, if the data in
Preinstalled folder is set, the set data is displayed even when PIM Lock is on.
･
Setting the clock display
☛
P147
･
Setting to display the i-channel ticker
☛
P309
Setting images, video/i-motion or Chara-den as the stand-by display
The image, video/i-motion or Chara-den saved from an i-mode site or mail and the still image or video
shot with FOMA terminal can be set as the stand-by display. Animation and Created animation can also
be set.
･
If you set a video/i-motion or Chara-den for the stand-by display when
Show ticker
in Ticker Setting is
set to Yes , Show ticker is canceled. After that, if you set other than the video/i-motion,
Chara-den and the i- α ppli stand-by display, Show ticker in Ticker Setting returns to Yes .
Vibrator alert
：
Sets the operation of vibrator when receiving a call, PushTalk call or mail.
･
When ON is set, an incoming call or mail is informed by vibration according
to Vibrator Setting (
☛
P129). Note that when OFF is set in Vibrator Setting,
the vibrator operates by
Pattern A
.
･
When OFF is set, the vibrator does not operate.
Keypad sound ： Sets keypad sounds.
Ring alert volume
： Sets the ring volume for incoming call.
･
The setting of Ring alert volume applies to the volume of i- α ppli. Note that
when
Step tone
is set, the i-
α
ppli volume is set to level 4.
Msg. alert volume
： Sets the ring volume for incoming mail.
ToruCa alert volume
：
Sets the volume of the sound which sounds when obtaining the ToruCa from
the reader/writer.
Low Battery Alert
：
Specifies whether to sound an alarm when the battery becomes low.
Alarm/Schedule sound ： Sets whether to sound an alarm or a schedule alarm.
･
When
ON
is set, the alarm or schedule alarm sounds according to each
setting. The setting of Ring alert volume in Customize Silent Mode applies
to the volume of schedule alarm.
･
When OFF is set, the alarm or schedule alarm does not sound.
Sensitize microphone
： Sets whether to sensitize the microphone.
Stand-by Di
s
p
lay
Setting
Note: The miniSD memory card is not included in the bundle and needs to be purchased.
☛
P339