Docomo FOMA D902i, Руководство пользователя, Страница: 315 / 500

313
Mobi
le Wall
e
t/
ToruCa
INFORMATION
● If the IC card is not recognized when you hold the FeliCa
mark over the reader/writer, try again by changing the
position, angle, etc.
● Do not expose FOMA terminal to strong shocks when
holding the FeliCa mark over the reader/writer.
● The IC cards can be used during a call or i-mode
connection by holding the FeliCa mark over the
reader/writer. However, you cannot start Mobile
Wallet compatible i-
α
ppli during i-mode connection.
● The IC card can be used by holding the FeliCa mark
over the reader/writer even when the power is off, but
not when the battery pack is removed. When you use
an IC card function, attach the battery pack. When
the battery pack is attached, if it is not used for an
extended period or is not charged after a low battery
alert, the IC card may not be used. In this case,
charge the battery.
● When the power is off, you cannot start Mobile Wallet
compatible i-
α
ppli to read and write data in the IC
card. You cannot acquire ToruCa either.
● i-
α
ppli may start when you hold the FeliCa mark
over the reader/writer. However, no i-
α
ppli starts
when the target i-
α
ppli is not saved or is set not to
start with i-
α
ppli To.
Starting Mobile Wallet compatible i-
α
ppli
1
m64
2
Select Mobile Wallet compatible i-
α
ppli
･
Mobile Wallet compatible i-
α
ppli can be auto
started, deleted and its folders managed in the
same way as normal i-
α
ppli.
■ Quitting:
Quit the Mobile Wallet compatible i-
α
ppli
using the procedure specified for each.
･
You can also quit by pressing
f
and selecting
Yes .
INFORMATION
● When Mobile Wallet compatible i-
α
ppli is started, the IC
card may not be used by holding the FeliCa mark over a
reader/writer.
● Some of Mobile Wallet compatible i-
α
ppli operations
may not be available during a video-phone call.
● When any of the following conditions occurs, Mobile
Wallet compatible i-
α
ppli under operation and reading
and writing data in the IC card are interrupted. In that
case, the data may be discarded:
･
When there is an incoming call (except when the
ringing time for Voice Mail Service and Call
Forwarding Service is set to 0 sec )
･
When a PushTalk call arrives (excluding the case
where i-mode preferred is set in i-mode Arrival Act:
PT)
･
When the date and time set in Alarm Clock or
Scheduler arrives
･
When you switch to another function
● When you press
b
during a call or alarm sounding to
switch to the Mobile Wallet compatible i-
α
ppli screen,
the operation varies for each Mobile Wallet compatible
service that you subscribe to.
● Some functions of Mobile Wallet compatible i-
α
ppli
may not start or operate correctly when your
terminal is outside the service area or cannot use
the saved data.
S
ta
rt
ing
M
obi
le
W
a
lle
t co
mpa
tibl
e
i-
α
ppl
i