Docomo FOMA D902i, Руководство пользователя, Страница: 297 / 500

295
i-
α
ppli
4 Press
p
･
When Set i- α ppli display is set to Yes , a
confirmation screen appears asking whether to
set i- α ppli as the stand-by display. Selecting
Yes sets the i- α ppli stand-by display.
INFORMATION
●
When Set NW transmission during i- α ppli display and
Set NW transmission are set to Yes , FOMA terminal
will automatically connect to the network.
●
When i- α ppli that connects to networks for
communication is set as the i- α ppli stand-by display,
communication may automatically be carried out
depending on i- α ppli.
●
Depending on this setting, network communication
from i- α ppli and icon information (unread mail,
remaining battery level, etc.) may not be able to be
used.
●
Note that if you set No for Set NW transmission ,
i- α ppli may not be started and timely information
such as stock prices or weather forecast may not be
provided by i- α ppli.
●
If Yes is set for Use icons , information about icons for
unread mail, unread Message R/F, remaining
battery level, Silent Mode, and icons within service
area/outside service area may be sent to IPs
(Information service providers) through the Internet,
which may give the information to a third party.
Setting the lighting and vibrator during i-
α
ppli
running
Light/Vibrate Setting
･
The i-
α
ppli stand-by display light operation
depends on the settings in Display Light Setting
for the display.
･
While Public mode (Driving mode) is on, the light
does not operate while i-
α
ppli is running even if
Use software setting is set.
1
m324 z 1
or
2
Allow the vibrator operation by i- α ppli.
･
While Public mode (Driving mode) is on, the
vibrator does not operate while i- α ppli is running
regardless of this setting.
1
m325 z 1
or
2
Starting another i-
α
ppli application from i-
α
ppli
You can start i-
α
ppli specified by some i-
α
ppli
applications, and enjoy it without returning to the
software list.
1
If a message appears indicating that the
specified i-
α
ppli will be started, press
o
INFORMATION
●
If the i- α ppli to start is not specified, select i- α ppli.
●
When the i- α ppli does not exist in the software list
even if specified, it is necessary to download it.
Using pre-installed i-
α
ppli
The following i- α ppli applications are registered by
default:
Select each i- α ppli application from the list to start.
･
Some i- α ppli names may be different from those
on the display.
･
ｉ アニメっちゃメーラー
super DX 500 and
珍さ
ん計画
DX
おこづかい帖プラス
can be set as the
i- α ppli stand-by display.
Allow access to phonebook/call records by software
*1
：
Specifies whether to allow i- α ppli to refer to
the phonebook or call log. If Yes is set, the
phonebook or call log may be referred to
automatically. This also applies to ToruCa
saved in FOMA terminal.
*1 This setting is available only for i- α ppli DX.
Setting display light
Default Use phone setting
Use phone setting
：
The light is turned on according to the
settings in Display Light Setting for the
display.
☛
P141
Use software setting
：
The light comes on according to i- α ppli.
Setting vibrator
Default ON
･
コラムスジュエル
(Columns Jewel)
･
珍さんと一緒 トランプ＆占い
(Mr. Chin’s
Cards & Fortune Telling)
･
ｉアニメっちゃメーラー
superDX500
(i-anime Mailer superDX500)
･
Ｇガイド番組表リモコン
(G-GUIDE TV
Remote Controller)
･
電子マネー「
Edy
」
(Electronic money “Edy”)
･
便利！多機能電卓
(Useful! Multifunction
Calculator)
･
珍さん計画 DX おこづかい帖プラス
(Mr.
Chin’s Scheduled Cashbook)
St
ar
ting i
-
α
ppli
Next