Docomo FOMA D902i, Руководство пользователя, Страница: 82 / 500

80
Ma
king/Receiving Video-phone Calls
INFORMATION
●
You can also make a video-phone call by performing in order of Steps 2, Step 1. When
t
is pressed and the
phone number is entered, the video-phone call is made automatically after about 5 seconds.
●
When Speakerphone is set to ON in Videophone Settings and Silent Mode is active, if you make a video-phone
call, a confirmation screen appears asking whether to switch to the speakerphone call. Select YES or NO .
●
When you talk on a video-phone call while a flat type earphone/microphone set with switch (optional) is
connected, the voice sounds from the connected earphone/microphone regardless of the setting of
Speakerphone in Videophone Settings.
●
Please note that digital communication charges apply for video-phone calls instead of voice call charges even
if the substitute image or Chara-den is used.
●
If a video-phone call cannot be made, the following message is displayed on the screen and then the stand-by
display returns. Note that the displayed message may not reflect the status of the other party’s terminal correctly,
depending on the type of the terminal and/or the network service used by the other party.
●
Video-phone via 32K line is intended for connection with devices such as PHS with which video-phone calls via
64K line may not be available depending on the network condition. When a video-phone call is made via 64K
line, the call type is automatically switched to via 32K for redialing if the communication environment of the
other party is found to be 32K area. When ON is set for Auto redial as voice , redialing via 32K line is also given
priority.
☛
P89
･
If a call is made via 32K line, the charge is the same as digital communication charge via 64K.
●
If a video-phone call made is not connected, redialing is automatically performed as described below:
When a video-phone call has been made by specifying a multi number, redialing will be made with the
specified number.
●
The auto redial as voice function is provided to ensure the connection to the other party.
☛
P89
･
If redialing as voice call occurs, voice call charges apply.
●
If a video-phone call is made to emergency calls (110, 119 or 118) from FOMA terminal while Auto redial as
voice is set to ON , the call automatically switches to a voice call.
●
You can make video-phone calls by setting conditions.
☛
P56
●
When there is an incoming call during dialing or redialing a video-phone call, the dialing may be interrupted and
the ring tone may sound.
●
Even if sending/receiving the voice or image is aborted and (only voice) or (only image) is displayed
during a video-phone call, the call may be continued as it is.
Message Description
Check number, then redial
. You dialed the phone number not used.
Busy. The other party is busy or during a packet communication.
Out of service area/power off . The other party is outside the service area or the other party’s terminal is
turned off.
Set caller ID to ON. This message is displayed in case connecting without notifying the caller ID
(when accessing to V-Live or visualnet).
Redial using voice call
. This message is displayed when the other party sets Voice Mail Service or
sets Call Forwarding Service and the forwarding destination is the terminal
which is not compatible with video-phone.
Connection failed. Set Caller ID Notification to Notify and dial again.
･
The message may appear in cases other than the above.
Call type Auto redial as voice setting Redialing operation
64K ON 64K → 32K → Voice call
OFF 64K → 32K → Disconnection
32K ON 32K
→
Voice call
OFF 32K
→
Disconnection
Making
video-phon
e
ca
lls