Docomo FOMA D902i, Руководство пользователя, Страница: 372 / 500

370
O
ther Conve
n
ient
Fun
c
tions
4
&
to switch to
Set sound
screen
z
Select and set each item
5
&
to switch to
Set others
screen
z
Select and set each item
6 Press
p
In the stand-by screen, or (when a
schedule alarm is also set) is displayed.
When the set time comes
The alarm screen appears and the alarm sounds. As
the alarm screen, the following screen or the video/
i-motion you set is displayed. The alarm sounds at
the set volume. If lighting or vibrator is set, it operates
according to its setting.
･
Pressing
f
while the alarm is sounding finishes
the alarm sound and the display before sounding
reappears.
･
If the terminal is left unoperated for about 1 minute
or a key other than
f
is pressed, the alarm sound
stops, and the terminal keeps ringing for 1 minute
followed by a 4-minute silent period repeatedly for
30 minutes (snooze operation). If video/i-motion is
set, the first image is displayed. If an incoming
voice call, video-phone call, or PushTalk call is
received while the alarm sounds, snooze operation
also starts in the same way.
･
If some operation such as a call is going on at the
set time, the terminal operates as follows:
･
During a call or a PushTalk call, the warning
sound but the alarm occurs and the alarm screen
appears. During PushTalk, the floor acquisition is
released and you cannot talk. In addition, the
vibrator does not operate even if FOMA terminal
has been set to notify a call by vibration. During
On-hold, the above operation is available after
canceling On-hold.
･
When power is off, neither the power is turned on
nor the alarm sounds. To sound the alarm, set
Alarm Auto Power ON to
ON
.
･
When the set time arrives during data
transmission/reception (except packet
communications) or while making, receiving or
disconnecting a call/PushTalk call, the alarm
operates after those operation ends.
Title
：
Up to 14 one-byte or 7 two-byte characters
can be entered.
･
The titles are set to
アラーム1
to
アラーム
9 by default. If the title field is not entered,
the alarm cannot be set.
Alarm sound
：
Select i-motion or Melody and select a video/
i-motion file or a melody as an alarm.
Volume
：
Select the volume.
･
Adjusting the volume
☛
P66
Vibrate alert ：
Set the vibration used at the alarm time.
Lighting pattern
：
Set the lighting pattern of the call indicator
for the alarm time.
･
When Sync melody or OFF is set, Lighting
color
cannot be set.
Lighting color
：
Set the color of the call indicator for the
alarm time.
Alarm
Clock