Docomo FOMA D902i, Руководство пользователя, Страница: 235 / 500

233
Ma
il
2
Select
Direct input
z
Enter the address (up to 50 one-byte characters)
･
When sending mail to an i-mode terminal, you may omit “@docomo.ne.jp” in the mail address.
･
In 5-touch Input Method, press
1
repeatedly in the alphabet input mode to enter “@”, “ . ”, “ - ”,
etc. In addition, “.co.jp”, “.ne.jp”, “.com”, etc. can be entered by pressing
(
repeatedly in the
alphabet input mode.
･
When the other party has registered a secret code, enter the other party’s i-mode terminal phone
number followed by the 4-digit secret code.
■ Searching the phonebook: Select
View phonebook
z
Search the phonebook
z
Select a
mail address
■
Using a mail group: Select Mail group
z
Select a mail group
･ Mail addresses must be registered in a mail group in advance.
･
If the total of entered addresses exceeds 5, the mail group cannot be added.
･
Press
m
to check the mail group details.
3
Select field
z
Enter the subject (up to 30 one-byte or 15 two-byte characters)
4
Select
z
Enter the message (up to 10,000 one-byte or 5,000 two-byte characters)
･
Line feeds can be inserted in the message. Press
#
to enter a line feed in 5-touch Input
Method (except in the one-byte and two-byte numeric modes). A line feed is counted as a
character in the message.
･ A space is also counted as a character in the message.
･
Text can be decorated.
☛
P235
■ Inserting a signature:
m5
･
Signature must be registered beforehand.
5
Press
p
･ Press
o
on the connecting screen to stop connection. Press
p
on the sending screen to stop
sending and to save the i-mode Mail to
Unsent messages
folder of Unsent messages. Even when
saved in Unsent messages folder, the i-mode Mail may be sent depending on the operation timing.
･
When you are outside the service area and the number of saved auto-send mails is less than 5, a
confirmation screen appears asking whether to send mail automatically in the service area. When
you select
Yes
, the mail is saved as auto-send mail in
Unsent messages
folder of Unsent messages.
INFORMATION
● When mail exceeding 10,000 bytes was automatically saved due to start of other functions, part of the mail
being composed may not be saved.
● Depending on signal conditions, characters may not be displayed correctly at the receiver side.
● Even if i-mode Mail is sent correctly, Transmission failed . may be displayed depending on signal conditions.
● Except for exchanges between i-mode terminals (including mova), do not use one-byte katakana characters or
pictograms. They may not be displayed correctly at the receiver side. Depending on the model of the receiver’s
i-mode terminal, some pictograms may not be displayed correctly.
● Depending on the settings of the receiver’s terminal such as the number of characters that can be displayed,
the font or its display size, face marks may not be displayed correctly and their shapes and views may be
different from the original ones.
● When transmission is completed correctly, the i-mode Mail is saved in Outbox folder of Outbox. However, when
the sent mail matches the criteria specified in Sort Criteria, it is saved in the specified folder. When there is not
enough available storage space, or the maximum number of saved items is exceeded, the oldest sent mail is
overwritten. Be sure to protect sent mail you want to keep.
● When transmission fails, an error message is displayed and the i-mode Mail is saved in Unsent messages folder
of Unsent messages. You can edit and send i-mode Mail from Unsent messages.
Co
m
pose Messa
g
e
Next