Docomo FOMA D902i, Руководство пользователя, Страница: 304 / 500

302
i-
α
ppli
Operating i-
α
ppli Stand-by Display
i-
α
ppli Stand-by Display
When i-
α
ppli is set for the stand-by display, you
can start i-
α
ppli from the stand-by display to
operate. or is indicated at the top of the
display when the i- α ppli stand-by display is set.
･
It is necessary to set i-
α
ppli for the stand-by
display beforehand.
☛
P136
INFORMATION
● When FOMA terminal is turned on with i-
α
ppli
Stand-by Display set, a confirmation screen is
displayed asking whether to start the i-
α
ppli
stand-by display. When you select
Yes
, the i-
α
ppli
stand-by display starts. When you select
No
, the
i-
α
ppli stand-by display setting is canceled. If you
operate nothing within 5 seconds after the
confirmation screen appeared, the i-
α
ppli stand-by
display starts automatically. When the power is
turned on by Auto Power ON, the i-
α
ppli stand-by
display automatically starts, without displaying the
confirmation screen.
● When you set i-
α
ppli that performs communication,
it may not operate correctly depending on radio
wave conditions, etc.
● If All Lock, PIM Lock or Privacy Mode (
i- α ppli
is set
to
Authorized access
) is activated while setting the
i-
α
ppli stand-by display, the stand-by display will be
canceled temporarily. If you cancel All Lock, PIM
Lock, or Privacy Mode, the i-
α
ppli stand-by display
restarts.
● If the use of i-
α
ppli set to the i-
α
ppli stand-by
display is stopped by IP (Information service
provider), the i-
α
ppli standby display is canceled.
● While the i-
α
ppli stand-by display is activated, if an
error that makes it difficult to continue the i-
α
ppli
stand-by display occurs, a confirmation screen
appears asking whether you will cancel or not.
When you select
Yes
, the i-
α
ppli stand-by display
setting is canceled. At this time, the name of i-
α
ppli
and end date/time are recorded in Abnormal Exit
History.
● You cannot connect to a site (Web To) from the
i-
α
ppli stand-by display.
Starting i-
α
ppli of the i-
α
ppli stand-by display
1
c
in the i-
α
ppli stand-by display
The screen is changed to the i- α ppli screen and
or blinks at the top of the display.
Quitting i-
α
ppli to return to the i-
α
ppli stand-by
display
1
f
while i-
α
ppli is running
z
Select
End
i- α ppli is ended and the i- α ppli stand-by display
is activated. The icon at the top of the display
switches from to , or from to .
･
The procedure to quit i- α ppli and return to the
i-
α
ppli stand-by display depends on the type of
i- α ppli.
c
makes some types of i- α ppli
return.
･
Even if
End
is selected, the i-
α
ppli stand-by
display setting is not canceled. To cancel,
select Cancel . and at the top of the
display disappear.
INFORMATION
● In addition, in the software list, select i-
α
ppli set for
the i-
α
ppli stand-by display, press
m
and select
i -α ppli display
to cancel i-
α
ppli.
Displaying the exit history of i-
α
ppli stand-by
display
Abnormal Exit History
When an error that makes it difficult to continue the
i-
α
ppli stand-by display occurs, the name of i-
α
ppli,
date and time are recorded.
･
Up to 20 abnormal exits are recorded. When
there are more than 20 abnormal exits, the 21st
exit is written over the oldest one.
･
In the normal end, exits are not registered.
1
m332
■
Deleting the history:
p z
Select Yes
Managing i-
α
ppli
Upgrading i-
α
ppli
Upgrade
When i-
α
ppli has been updated, it can be upgraded.
･
i-
α
ppli whose usage is stopped by IP (Information
service provider) cannot be upgraded.
1
d
(for over a second)
z
Select a folder
2
Highlight i-
α
ppli
z m5 z
Select Yes
･
When upgrade is unnecessary, the message
that i-
α
ppli is the newest is displayed.
i-
α
pp
li
S
tand
-b
y
Dis
p
la
y