Docomo FOMA D702iF, Руководства

Страница: 341 / 451

339 339
Dat
a
Comm
unic
a
tio
n
339
Some dialup connections require user authentication
(ID and password) before a connection can be
established. If user authentication is required, you
must use your communication software or dialup
network to enter your ID and password before
connection. Your ID and password will be assigned
by the provider or network administrator of in-house
LAN, etc. For more information, contact your provider
or network administrator.
To authenticate FirstPass (user certificate), you must
install FirstPass PC software from the attached CD-ROM
and configure it. For details, see “FirstPassManual” in the
CD-ROM.
To view “FirstPassManual” (PDF format), Adobe
Reader (version 6.0 or later recommended) is required.
If Adobe Reader is not installed in your PC, please
install Adobe Reader in CD-ROM mentioned above
beforehand. For details on how to use, refer to the
Help menu of Adobe Reader.
To perform data communication from FOMA terminal,
the following conditions must be satisfied.
･
The PCs which may use a FOMA USB cable
(optional).
･
You must be within the FOMA service area.
･
Packet communication requires an access point
that supports FOMA packet communications.
･
64K data communication requires an access point
that supports FOMA 64 kbps or ISDN synchronized
64 kbps data communication.
However, even when the above requirements are
satisfied, you may not be able to perform data
communication if base station traffic is heavy, or the
signal quality is poor.
Flow of setup for data communication
The setup work needed to connect FOMA
terminal to a PC to perform packet or 64K data
communication is as follows:
User authentication during network access
Access authentication when using PC browser
Conditions of packet communication and
64K data communication
Glossary of data communication
●
Administrator privilege
A user level that provides complete access to all OS
functions in Windows XP and 2000. There must be
at least 1 user that has administrator privileges for
each PC. A user that has no administrator privileges
is not normally allowed to install/uninstall drivers and
software.
● APN (Access Point Name)
String to identify a provider, etc. to connect by
packet communication. The APN for mopera U is
“mopera.net” and mopera is “mopera.ne.jp”.
● cid (Context Identifier)
The registration number when writing packet
communication dialup connection (APN) information
to FOMA terminal. 10 numbers from 1 to 10 are
available for FOMA terminal.
By default, “mopera.ne.jp” is registered in cid1, and
“mopera.net” in cid3.
●
W-TCP
A TCP parameter designed to fully utilize TCP/IP
transmission capacity during packet communications in
a FOMA network. This communication setting is
essential to enable full use of FOMA terminal capability.
Install the FOMA PC configuration software
(Easy Setup)
Packet communication
setup
(Easy Setup)
64K data communication
setup
Execute communication
Set up communications without using FOMA PC
configuration software
Connect
Install the communication configuration file
Connect a PC to FOMA terminal
Check the communication configuration file
Fl
o
w
of
se
tup
for
da
ta
comm
u
n
icat
ion