Docomo FOMA D702iF, Руководства

Страница: 424 / 451

3
Checking operating environment
Use the communication configuration file and the
FOMA PC configuration software in the following
operating environments:
*1 USB port (conform to USB specification 1.1/2.0) is
required.
*2 The operation from OS upgrading is not covered by the
warranty.
INFORMATION
● Note that utilization may not be possible in certain
operating environments. Furthermore, operation will
not be guaranteed in an environment other than that
described above or by upgrading the OS and
DoCoMo assumes no responsibility for operation
under such conditions.
Before installation/uninstallation
･
Installing and uninstalling the communication
configuration file or the FOMA PC configuration
software under Windows XP or 2000 can only be
performed by a user with administrator privileges.
Attempts made by other users will result in errors.
For details on PC administrator privileges, refer to
the instruction manual of the PC or contact your PC
manufacturer or Microsoft Corporation.
･
Before starting operation, make sure that no other
program is running. If there is any active program,
save and exit the program before operation.
Connecting PC to FOMA terminal
The connection should be made with the PC and
FOMA terminal both switched on.
･
Be sure to install the communication configuration
file (driver) before connection.
☛
P4
Connecting a PC
Connect by using the FOMA USB cable (optional).
a
Open the cap on the FOMA terminal’s
external connection terminal
b
Insert one end of the FOMA USB cable into
the FOMA terminal’s external connection
terminal until it clicks
c
Insert the other end of the FOMA USB cable into
the PC USB connector
･
When a PC and FOMA terminal are connected,
appears on the display of FOMA terminal.
･
If you connect FOMA terminal to a PC before
installing the communication configuration file,
the wizard screen indicating the detection of new
hardware will be displayed. In that case, remove
FOMA terminal and click
キャンセル (Cancel) to
exit the wizard.
■
Removing FOMA USB cable
Pull the connector for PC out from the side of PC.
Be sure to press release buttons on both sides of
the connector for FOMA terminal. Forcing to pull it
out may cause a malfunction.
Item Requirements
PC* 1 PC/AT compatible computer
OS*
2
The Japanese version of
Windows 2000 or XP
Memory
requirements
Windows 2000: 64MB or more
Windows XP: 128MB or more
Hard disk capacity 5 MB or more free disk space
Connector
(label facing up)
Release button
USB connector
Next
D702iF Manual for Data Commu.fm 3 ページ ２００６年７月２９日 土曜日 午後１２時１分