Docomo FOMA D702iF, Руководства, Страница: 394 / 451

392
A
ppendix/
Da
ta I
n
te
rc
ha
n
g
e/Tro
ubleshooti
n
g
●
Any incoming videophone call cannot be answered
during download. Unanswered calls are recorded as
missed ones in the received call history.
●
Even if an alarm clock or any alarm is set while software
is being updated, the updating continues without
activating the alarm clock or the alarm.
●
For software update, SSL session is established to the
server (our site). Enable SSL certificate in Certificate
Setting. Configured as valid by default.
☛
P196
●
Software update should be done with battery fully
charged and enough battery power ( ).
●
It is recommended that software update be executed
when good signal quality is obtained, 3 bars of the
antenna icon ( ) are displayed and the terminal is not
being moved.
･
If radio wave signals become weaker during software
downloading or downloading has stopped, retry
software update in a place with strong radio wave
signals.
●
A displayed icon for the message stored at i-mode
Center disappears after software update.
If Receive Option Setting is set to ON and mail arrives
during software updating, the screen that notifies an
arrival of mail in the i-mode Center may not appear after
the software update being completed.
●
Never remove the battery pack while updating software.
Update fails.
●
Software update can be done while various data, such as
the phonebook entries registered in FOMA Terminal,
camera images, downloaded data are retained; however,
note that data protection sometimes cannot be secured
depending on the conditions of your FOMA terminal
(such as malfunction, damage, or water leak). DoCoMo
recommends backing up necessary data. (Note that some
data such as downloaded data may not be backed up.)
●
When software update has failed, the message Rewrite
failed
appears and all the operations are unavailable. In
such a case, please bring FOMA terminal to a repair
office designated by DoCoMo.
●
In case updating is not required, when checking the
necessity of software update, a message is displayed
indicating update is not necessary, so use as it is.
●
Software update is available even if Host Selection is set
to other than i-mode.
Starting software update
1
m886
2 Enter the terminal security code
z
Check
notice and
o
･
The entered terminal security code (4 to 8
digits) is displayed as “
＊
”.
･
The terminal security code by default is set to
“0000”.
3
o o z
Confirm whether software
update is required
･
Pressing
o
on the confirmation screen for
sending terminal ID makes connection to the
server and your private information concerning
the mobile phone (such as model, serial
number) is sent.
■ When updating is not necessary:
If software updating
has been found to
be unnecessary as
a result of checking
for the necessity of
updating, the screen
as shown on the left
is displayed. Press
o
to use FOMA
terminal as it is.
Softw
are Update