Docomo FOMA D702iF, Руководства

Страница: 53 / 451

51
Making/
Rec
e
iv
ing Cal
ls
1
Hold down
#
for over a second
･
Timed pauses can be entered in succession.
･
Each timed pause is followed by a second interval.
･
You cannot make a call if a timed pause is entered at the beginning of the phone number.
INFORMATION
●
Tone signals (DTMF) may not be received depending on the receiving device.
●
You cannot make a call to another party by putting the current call on hold and entering a pause (P) or timed pause (T).
●
When it is necessary to send tone signals (DTMF) following voice prompts as in making ticket reservations, the
speakerphone function is useful. In this case, input tone signals (DTMF) after turning on the speakerphone function.
Switching from a voice call to a videophone call
You can switch to a videophone call by operating from the submenu during a voice call when the other
party’s terminal can switch calls. Switching can be performed only from the terminal that made the voice
call.
･
This operation can be performed between the terminals that support switching between voice call/
videophone call.
･
To switch to a videophone call, the other party needs to set Indication ON of Notify Switchable Mode in
advance.
☛
P90
1
m1
during a voice call
z
Select
Yes
･
A guidance informing that the call is being switched is played during switching.
･
Select
No
to return to the voice call talking screen.
･
If
Speakerphone
is set to
ON
in Videophone Settings, the speakerphone function is automatically turned
on when the call is switched to a videophone call.
INFORMATION
●
During packet communication, disconnect the packet communication and switch to a videophone call.
●
When the other party is during packet communication, the call cannot be switched to a videophone call.
●
While talking on the phone using Call Waiting Service, you cannot switch the call to a videophone call.
●
It takes about 5 seconds to switch. However, it may take longer depending on radio wave conditions.
●
Depending on radio wave conditions, a voice call and videophone call may not be switched and the call my be
disconnected.
●
A second call received while switching calls is rejected.
●
The speakerphone function is turned off when a videophone call is switched to a voice call.
●
The settings (such as switching the cameras or selecting the frame) made during a videophone call are canceled every
time a voice call and videophone call are switched.
●
According to the call duration of a voice call and videophone call, the call charges are added up, respectively.
●
The call is not charged while Switching... is displayed.
●
Switching from a videophone call to a voice call
☛
P80
S
w
it
chi
n
g fr
om a
v
o
ice
ca
ll
to
a vi
deoph
one cal
l