Docomo FOMA D702iF, Руководства

Страница: 323 / 451

321
Other Convenient
Fu
nct
ions
INFORMATION
●
The fee for sending Chaku-moji is not included.
●
No last charge information appears as “ ＊＊＊＊＊＊ YEN”.
●
When you switch between the voice call and the
videophone during a call, the last call cost shows the
total amount of each call respectively. During the
operation to switch, no call cost is required.
●
When the last or total duration of voice/videophone call
or data communication exceeds 9,999 hours 59 minutes
59 seconds, counting is restarted from 0 second.
●
When FOMA terminal is turned off, the last call duration
is stored, but the last call cost is displayed as “
＊＊＊＊＊＊
YEN”.
●
The duration of receiving a call and ringing time cannot
be counted.
●
The call duration and call cost is not counted for i-mode
communication and packet communication. For details of
those usage fees, see “i-mode User’s Manual” you
received when you subscribed to i-mode.
Resetting the call cost automatically
Reset Call Cost
Total call cost is set to zero automatically on the
1st day of each month.
1
m8444
2 Enter the terminal security code
z 1
･
To cancel: Enter the terminal security code
z
2
3
Enter the PIN2 code
INFORMATION
●
Even if the setting is
ON
, the setting is canceled when
the UIM different from the one used during the setting is
inserted and then turn the power on. It doesn’t return to
the previous setting even if the UIM used when setting it
is inserted again.
●
When the setting is ON , the call cost will be reset if you
change the date and time to the next month in Date and
Time Setting.
●
When the setting is
ON
, if the terminal is not turned on or
if you talking on the terminal at 00 o’clock of the first day
of the month, a reset will take place when you turn the
power on or end the call.
●
If the setting is
ON
, the PIN2 code is required when you
turn the power on.
Setting to notify the limit of call cost
Call Cost Limit
Set the maximum limit of call cost and, when the
total call cost exceeds the set amount, it is
notified with an alarm or icon.
･
The amount shown in Call Cost Limit is only an
estimate and should not be regarded as the
actual amount for billing.
1
m8442
2
Enter the terminal security code
z
Select
and set each item
3 Press
p
INFORMATION
●
If the call cost exceeds the maximum limit while talking or
during communication, is displayed at the top of the
display.
● When Sound + icon display is set for Alert method , the
alarm sounds and message informing that the call cost
exceeds the maximum limit is displayed on the standby
display after a call/communication. In the general silent
mode, a message appears but the alarm does not sound.
In the personalized silent mode, the alarm sounds
according to the ring alert volume set for Customize
Silent Mode. If the call cost exceeds the limit during a call
or communication at 00 o’clock of the first day of the
month when Reset Call Cost is set to ON , neither the
alarm sounds nor the message appears.
●
Neither the alarm sounds nor the message appears while
Lock on Close is active.
Default OFF
Default Alert: OFF
Alert
：
Set whether to notify when the total call cost
exceeds the set amount.
･
If
OFF
is set, the items below cannot be
set.
Limit ：
Set the maximum amount of call cost (10 to
100,000 yen. 10 yen unit).
Alert method
：
Select the alarm with icon, or the icon only.
Alert sound
：
Select an alarm sound from the melody list
when
Sound + icon display is selected in Alert
method
.
･
Playing and checking a melody
☛
P117
Alert time ：
Specify how many seconds alarm sound
should ring (1to 60 sec.). Available when
Sound + icon display is selected in Alert
method .
Reset Cal
l Cost
Next