Docomo FOMA D702iF, Руководства

Страница: 144 / 451

142
S
a
fet
y
S
e
tti
ngs
Security code
Security codes
Some FOMA terminal functions for convenient use require the entry of security codes. There are
security codes such as the network security code for use in network services and the password for
i-mode in addition to the terminal security code for various terminal functions. Fully use your FOMA
terminal by choosing the security code to suit your needs.
Terminal security code
The default terminal security code is “0000”, which can be changed to a code of your own choice.
☛
P143
Network security code
Network security code is the arbitrary 4-digit code that is set at subscription to FOMA terminal for various
procedures for the DoCoMo e-site and usage of network services. You can optionally change the code.
If you have “My DoCoMo ID/Password” for “My DoCoMo” which is the total support site for PC, you can perform
the change procedure for a new network security code from a PC.
From i-mode, you can change the code by yourself accessing
各種手続き
(Procedures) in DoCoMo e-site.
･
Please refer to the back of this manual for “My DoCoMo” and “DoCoMo e-site”.
i-mode password
A 4-digit “i-mode password” is required to store/delete sites in My Menu or apply to/cancel Message Service or
i-mode pay services (in addition, there may be passwords required by individual information service providers).
The default i-mode password is “0000”, which can be changed to a code of your own choice.
When changing from i-mode, select iMenu
→
ENGLISH
→
d
Options
→
b
Change i-mode Password .
PIN1 code/PIN2 code
The PIN1 and PIN2 codes can be set for the UIM. Both codes are set to “0000” at the subscription and can be
changed to a code of your own choice.
☛
P144
The PIN1 code is the 4 to 8 digits security code entered to confirm the user every time the UIM is inserted to
FOMA terminal or the power of FOMA terminal is turned on to protect your FOMA terminal from unauthorized
use by the third party. Entering the PIN1 code enables making or receiving calls and FOMA terminal operations.
The PIN2 code is the 4 to 8 digits security code required when resetting the total calls cost, or using a user
certificate or requesting the issue of it.
･
The settings of the PIN1/PIN2 codes and PIN1 Code ON/OFF are recorded in the UIM. When using the
current UIM to a FOMA terminal you newly purchased, the PIN1/PIN2 codes that you set previously can be
used likewise.
Precautions for security codes
･ As for the security code to set, please avoid the number intelligible for others, such as “a birth
date”, “a part of phone number”, “an address number or a room number”, “1111” or “1234”.
In addition, be sure to keep a separate note of the set security code not to forget.
･
Please be careful never to reveal your security code to others. If your security code is known and
misused by others, DoCoMo accepts no responsibility whatsoever for the damages.
･
DoCoMo will never ask your security code.
･
Please note that, if you forget the security codes, you need to bring a document (such as a driver’s
license) for identifying that you are a subscriber, your FOMA terminal and the UIM to a DoCoMo Shop.
For the detail information, contact “General Inquiries” on the back of this manual.
S
ecur
it
y
c
o
de
s