Docomo FOMA D702iF, Руководства

Страница: 46 / 451

44
Bef
o
re Using
D702
iF
1
Hold down
f
for over 2 seconds
INFORMATION
●
When you turn on the power of FOMA terminal after replacing the UIM (except when Omakase Lock (Remote Lock) is set),
entry of the 4 to 8-digit terminal security code is required. After entering the correct terminal security code, the standby display
appears. If a wrong terminal security code is entered 5 times consecutively, the power is turned off (but can be turned on
again).
●
Calls may be cut off even when is indicated and you are not moving.
●
When Lock on Close is set to ON , entry of the terminal security code is required.
●
When PIN1 Code ON/OFF is set to
ON
, entry of the PIN1 code is required.
●
When Reset Call Cost is set to ON , entry of the PIN2 code is required.
●
When
Normal use
of
Display light time
in Display Light Setting is set to other than
Always
, if you do not press any keys for
about 5 minutes while the standby display is on with FOMA terminal open, the display disappears and FOMA terminal
goes into a power saving mode. While the display is off with FOMA terminal open, the sub-display flashes in white at
about 6-second intervals. If there is any key operation* 1 or an incoming call, the display appears again (except in Public
mode (Driving mode)). However, FOMA terminal does not turn into a power saving mode in the following cases:
･
During a videophone call
･
While charging with
AC adapter connected
of
Display light time
set to
Always on
･
While executing the function for which Display light time is set to Always on
･
While running i-
α
ppli with
i- α ppli active
of
Display light time
set to
Software
*1 Pressing keys does not enter numbers, etc.
Switching to English display
Select Language
1
m8272
2
Press
2
･
To switch to Japanese display:
1
INFORMATION
●
This setting is saved in the UIM.
Setting the date and time
Date and Time Setting
The time setting can be performed in 2 ways: obtaining the time information from the DoCoMo network
to adjust the time setting of FOMA terminal, or manually entering the current time to the terminal.
1
m851
Turning the power off
Default Japanese
Default Auto time adjust: ON Offset: +, 00h00m
Se
le
c
t La
n
guage