Docomo Arrows NX F-06E, Инструкция по эксплуатации

Страница: 79 / 216

Applications
77
･
If the data in the IC card and docomo mini UIM card is lost,
modified or damaged by any means related to Osaifu-Keitai
compatible service such as malfunction or model change,
DOCOMO assumes no responsibility for the loss of data.
･
If the terminal is stolen or misplaced, immediately contact
Osaifu-Keitai compatible service provider for an advice.
◆ Using "Osaifu-Keitai service"
1
From the Home screen, → [Osaifu-keitai]
･
If the initial setting has not yet made, the initial setting
screen appears. Follow the onscreen instructions to set.
2
Select a service
3
Set up the service
･
Make the required settings from the service site or
application.
4
Hold mark over a card reader
✔
INFORMATION
･
When reading/writing data, you need not activate Osaifu-
Keitai application.
･
Powering on the terminal is not necessary, but if the terminal
remains powered off for a long time or battery is low, the
function may not available.
･
For non-subscriber to sp-mode, a part of Osaifu-Keitai service
may not be available.
◆ Using " かざしてリンク対応サービス
(Kazashite-Link compatible service)"
1
From the Home screen,
→
[Settings]
→
In
WIRELESS & NETWORKS, [More...] → [NFC/
Osaifu-Keitai Settings]
･
If [Lock NFC/Osaifu-Keitai] is marked, unmark the
checkbox.
2
Mark [Reader/Writer, P2P]
3
Hold mark over a device equipped an NFC
module, a smart poster, etc.
･
In addition, you can exchange information between
terminals using Android Beam.
→ P157
mark
IC card reader