Docomo Arrows NX F-06E, Инструкция по эксплуатации

Страница: 178 / 216

Appendix/Index
176
■
Maps/GPS function
●
Cannot set AUTO-GPS service information.
• Is AUTO-GPS function disabled due to battery low? If
AUTO-GPS is disabled by Lower-power operation
settings, AUTO-GPS service information cannot be set.
In this case, set Lower-power operation settings to [Not
suspend] or charge the battery.
→ P131
• Is AUTO-GPS operation setting set to OFF? → P131
• Is GPS function OFF? When GPS function is OFF, AUTO-
GPS function stops.
→
P131
■
Others
● When performing fingerprint authentication or
registering fingerprints, [Swipe was too short] or [Swipe
was too slow], etc. appears without touching the
fingerprint sensor.
Possible cause is that the surface of the fingerprint sensor
is wet or condensed of moisture. Wipe water off with a
soft cloth before use.
● Screen display turns off when using the fingerprint
sensor.
The terminal goes into sleep mode by pressing the
fingerprint sensor. Slide your finger over the fingerprint
sensor not pressing the sensor.
●
Fingerprint authentication is unavailable when
connecting terminal with a PC, etc.
When connecting the terminal using a USB cable to a
device which requires grounding such as a desktop PC,
make sure that the device is grounded in advance. If the
connected device is not grounded, fingerprint
authentication may be unavailable. In such a case,
disconnect the terminal from the device and retry
fingerprint authentication.
●
Data saved in the USB mass storage are not displayed.
Remove and then attach the USB mass storage again.
● Cannot recognize a commercially available external
device (USB mouse, keyboard, etc.).
If you use a commercially available conversion adapter for
microUSB, connect the conversion adapter for microUSB
and an external device, and then connect to the terminal.
◆
Error messages
●
Memory space is full
The terminal is low on memory. If you keep using, some
functions and applications may not be operated.
Open setting screen to select unnecessary apps, then
press "Uninstall" to uninstall them.
Displayed when available memory of the terminal is low.
Tap [Setting screen] to delete unnecessary applications.
Alternatively, end running applications or clear cache of
applications to increase memory space.
→
P46,130
● Please wait for a while (Voice service) ／ Please wait for a
while (Data service)
Phone line or packet communication facilities are broken
down or line or packet communication network is very
busy. Wait a while and then operate again.
●
Cannot activate the fingerprint sensor.
It appears when the fingerprint sensor does not work
properly. If the fingerprint sensor is disabled, please
contact a docomo Shop near you.
● The PIN unlocking code has been locked
This message appears when PUK code is entered with
docomo mini UIM card is PUK locked. Contact a sales
outlet such as docomo Shop.
→
P133