Docomo Arrows NX F-06E, Инструкция по эксплуатации

Страница: 175 / 216

Appendix/Index
173
●
Operations are not possible when tapping the screen.
• Do you operate with a gloved hand?
• Do you operate with a fingernail or foreign object on the
screen?
• Do you put a protective sheet or sticker on the display?
Depending on the protective sheet, you cannot operate
the terminal correctly.
• Do you operate with the touch panel wet or with your
finger wet with sweat or water?
• Do you operate under water?
• Touch the screen with your finger directly to operate the
terminal.
● Operations are slower/Application operation is
unstable/Some applications are not activated.
Operation becomes unstable if the terminal is low on
memory. When a message indicating the memory space
is short is displayed, delete unnecessary applications.
→
P131
● Applications cannot be operated properly (applications
cannot be activated, or errors occur frequently).
Are there any applications being disabled? Enable
disabled applications, then retry to operate.
→ P131
●
Data is not displayed normally/Normal touch panel
operations are not possible.
Turn the terminal OFF and ON.
→
P31
■
Phone/Voice call
●
Cannot dial by tapping
Do you set Airplane mode? → P119
● During a voice call, the distant party's voice is hard to
listen to or too loud.
Change the listening volume. Turn Voice clear, Voice
slowing and Voice adjust ON to make the other party's
voice easy to understand.
→
P55
● Calls are not connected (Even when moving, 圏外 (out of
service area) does not disappear or although radio
waves are enough, making/receiving calls is
unavailable).
• Turn the power OFF and ON, or reattach the docomo
mini UIM card.
→
P26, 31
• Due to the nature of radio waves, making/receiving calls
may be unavailable even when 4 signal status icons
appear on the display. Move to call again.
• Do you set call restriction such as Reject unregistered
call or Decline call? → P57
• Have you changed network type (LTE/3G/GSM)? → P166
• Due to the crossing of radio waves, at the crowded
public places, calls/mails are crossed and the
connection status may not be good. In this case, [Please
wait for a while] appears and the caller hears a busy
tone. Move to other place or call again at other time.