Docomo Arrows NX F-06E, Инструкция по эксплуатации

Страница: 136 / 216

Settings
134
❖
Changing PIN code
Set the PIN code (mark [Lock SIM card]) in advance.
1
From the Home screen, → [Settings] →
[Security] → [Set up SIM/RUIM card lock]
2
[Change SIM PIN]
3
Enter the current PIN code → [OK]
4
Enter the new PIN code → [OK]
5
Re-enter the new PIN code
→
[OK]
❖
Entering PIN code
1
Turn power ON → Enter PIN code on the PIN
code entry screen →
❖
Disabling PIN lock
If PIN code is locked, unlock PIN and set new PIN code.
1
Enter PUK code in the PIN code entry screen →
2
Enter the new PIN code
→
3
Re-enter the new PIN code →
◆ Screen lock
The lock screen can be displayed to prevent misoperation.
❖
Selecting lock
Set to display the lock screen or authenticate on the lock
screen when returning from the sleep mode.
･
To select [Security on], set security unlock preference in
advance.
→ P135
1
From the Home screen, → [Settings] →
[Security]
2
[Select lock]
→
Select an item
❖
Locking/Unlocking screen
■
Lock
1
P
/Press the fingerprint sensor
The terminal goes into sleep mode and the screen is
locked.
■
Unlock
1
In sleep mode, press
P
/the fingerprint sensor
→ On the lock screen,
･
Depending on the lock selection ( → P134),
authentication is operated on the lock screen.
･
For fingerprint authentication, if you press the
fingerprint sensor in Step 1, release your finger from the
fingerprint sensor and then slide with the registered
fingerprint to unlock.
･
When the fingerprint authentication is not available,
you can authenticate by tapping other unlocking
method button.