Docomo Arrows NX F-06E, Инструкция по эксплуатации

Страница: 120 / 216

Settings
118
❖
Advanced Wi-Fi settings
1
From the Home screen,
→
[Settings]
→
[Wi-
Fi]
2
→ [Advanced]
3
Set each item
Network notification : Set to notify you when Wi-Fi open
network is available.
Wi-Fi Auto ON/OFF : Turn Wi-Fi to ON/OFF automatically
using information from the mobile network base
station. Set whether to automatically turn Wi-Fi to ON
or OFF if detecting an area where Wi-Fi connection was
performed.
Wi-Fi sleep policy : Set whether to use Wi-Fi when the
terminal screen is OFF or while the battery is charged.
Avoid poor connections : Set whether not to use Wi-Fi
network when it is unstable.
Wi-Fi frequency band : Set Wi-Fi frequency band.
Wi-Fi optimization : Set whether to minimize battery
usage when Wi-Fi is ON.
MAC address/IP address : Display MAC address, IP
address.
auto-IP setting : Enable/disable auto-IP function.
✔
INFORMATION
･
[Wi-Fi Auto ON/OFF] does not work if Airplane mode or Wi-Fi
tethering is ON.
･
The terminal may not connect automatically even when [Wi-
Fi Auto ON/OFF] is activated because Wi-Fi information in the
area is changed etc. In such case, connect manually.
◆ Easy Wi-Fi registration
You can connect through simple operations when connecting
via a Wireless access point supporting AOSS

or WPS.
1
From the Home screen,
→
[Easy Wi-Fi
registration]
2
[Easy Wi-Fi registration] → Select a registration
method
AOSS

system : [AOSS system] → Tap [AOSS] button →
Perform operations on the access point → On the
registration screen, [Finish]
･
For the first using, agree to "
ソフトウェア使用許諾書
(License Agreement)".
WPS system : [WPS system] → [Push button system]/[PIN
entry system (8 digits)]/[PIN entry system (4 digits)] →
Perform necessary operations on the access point
･
In case of push button method, press a dedicated button
on an access point. In case of PIN entry method, enter
PIN code displayed on the terminal to an access point
device and tap [OK].
✔
INFORMATION
･
For some wireless LAN access points, AOSS

connection
may not be established. If connection is failed, use WPS
connection or connect manually.
･
When security on the wireless LAN access point is set to WEP,
you cannot connect in WPS system.