Docomo Arrows NX F-06E, Инструкция по эксплуатации

Страница: 24 / 216

Contents/Precautions
22
・
The rubber gaskets of the jack cap and slot cap play
important roles for keeping waterproof/dustproof
performance. Do not remove or scratch the rubber gaskets.
Also, prevent dust from adhering to them.
To keep the terminal waterproofness/dustproofness,
replacement of parts is recommended every 2 years
regardless of whether the terminal appears normal or
abnormal. DOCOMO takes the terminal to replace the
parts as a chargeable service. Bring the terminal to a sales
outlet such as a DOCOMO-specified repair office.
◆
Important precautions
Do not perform actions shown in the illustrations below.
Observe the following precautions to use the terminal
properly.
・
Accessories and optional devices are not waterproof/
dustproof. When watching TV, etc. with the terminal
installed in the included desktop holder, do not use it in a
bathroom, shower room, kitchen or lavatory even if it is not
connected to the AC adapter.
・
Do not apply water flow stronger than allowed ( → P20). Even
if the F-06E is waterproof in IPX5 waterproof, water may
enter inside from a damaged section and cause troubles
such as electric shocks or corrosion of the battery.
・
If the terminal gets wet with salt water, sea water, refreshing
beverage, etc. or mud or soil adhered, wash it immediately.
If they dry out, it is hard to remove the dirt and it may cause
damage or malfunction.
・
Do not put the terminal in hot water, use it in a sauna or
apply hot airflow (from a hair dryer etc.) to it.
・
Do not move the terminal in water or slam the terminal
against the surface of water.
・
When you use the terminal in swimming pool, obey rules of
the facility.
・
The terminal does not float on water.
・
Do not leave water on the terminal. May short-circuit the
power jacks, or in a cold region, water may freeze causing
malfunction.
・
Do not leave water on the stereo earphone jack,
microphone, earpiece or speaker. Such water may interfere
with talking.
・
Do not leave water drop attached around the temperature/
humidity sensor. May cause incorrect measurement of
temperature/humidity.
<Example>
Using Soap/
Detergent/Bath powder
Soaking in
ocean water
Using in
hot spring
Applying strong
water flow
Washing with
brush/sponge
Machine-washing