Docomo Arrows NX F-06E, Инструкция по эксплуатации

Страница: 168 / 216

International roaming
166
❖
About inquiries
･
For loss or theft of the terminal or docomo mini UIM card,
immediately contact DOCOMO from the spot to take the
necessary steps for suspending the use. For inquiries, see
the last page of this manual. Note that you are still liable for
the call and communication charge incurred after the loss or
theft occurred.
･
For using from land-line phone, entering "International call
access code" or "Universal number international prefix" for
the country is needed.
By default, the terminal is set to automatically search and
switch to an available network. To switch network manually,
perform the following operations.
･
If you release SIM lock and use SIM by a carrier other than
NTT DOCOMO to perform data communication, set an
access point (APN) before use.
→ P114
◆ Setting Network Mode
1
From the Home screen,
→
[Settings]
→
In
WIRELESS & NETWORKS, [More...] → [Mobile
networks]
2
[Network Mode]
3
[LTE/3G/GSM (Auto)]/[LTE/3G]/[GSM]
✔
INFORMATION
･
If the mode is set to [LTE/3G/GSM (Auto)] and a GSM/GPRS
network and 3G network of the same network operator are
detected at the same time, connection to a 3G network is
given priority.
･
If the mode was set to [GSM] in the country you visited, set
the mode to [LTE/3G] or [LTE/3G/GSM (Auto)] after returning
to Japan.
◆
Setting a network operator manually
1
From the Home screen, → [Settings] → In
WIRELESS & NETWORKS, [More...]
→
[Mobile
networks] → [Network operators]
Available networks are searched for and displayed.
･
If an error occurs in network search, unmark [Data
enabled] and retry.
→ P122
2
Select a network of the network operator
✔
INFORMATION
･
If the network operator was set manually in the country you
visited, set [Network operators] to [Choose automatically]
after returning to Japan.
Settings for overseas use